LEAS SCN 1500x900 Continuous CN welding machine
A gép jellemzői
- Név
- LEAS SCN 1500x900 Continuous CN welding machine
- Cikkszám
- 866434
- Gyártó
- LEAS
- Típus
- SCN 1500x900
- Gyártás éve
- 2007
- Termék ekkortól elérhető
- immediately
- Termék minősége
- Helyszín
-
Olaszország, 61020 Montecalvo in Foglia
- Megjelenítés a térképen
- Valamennyi termék ezen a helyszínen
Szállítási is fizetési feltételek
- 1,200.00 €
- Szállítási költségek
- nem tartalmazza
- Szállítási feltételek
- FCA Montecalvo in Foglia, tehergépkocsira rakodva
- Fizetési feltételek
- 100% kifizetés az elhozatalt megelőzően
Technikai adatok
- beállítás méretei (h x sz x m)
- 8,200 x 3,800 x 2,400 mm
- Tömeg kb.
- 6,700 kg
Termék leírása
Wheel welding machine in a water bath, perfect for welding tubs to steel worktops.
It uses the same technology as a spot welder, but applied continuously via a wheel, which allows for continuous, stagnant welding between sheets. The water jet allows the steel not to heat up and not deform. Also equipped with two additional water collection tanks suitable for surfaces up to 5 meters long.
Its working range is 1500 x 900mm, welding speed from 3 to 7 m/min depending on the thicknesses to be welded.
No programming software is needed as everything is done from the machine. The production cycle on the machine consists of a first spot welding phase to lock the tank to the surface, followed by the actual welding, a single cycle without tool changing.
Machine not used since 2018, used for about a hundred hours, practically still new, only the NC battery needs to be replaced and the back up reloaded.
There are some sink templates available that can be supplied.
LEAS technology video https://www.youtube.com/watch?v=W6MOL80-UPs
It uses the same technology as a spot welder, but applied continuously via a wheel, which allows for continuous, stagnant welding between sheets. The water jet allows the steel not to heat up and not deform. Also equipped with two additional water collection tanks suitable for surfaces up to 5 meters long.
Its working range is 1500 x 900mm, welding speed from 3 to 7 m/min depending on the thicknesses to be welded.
No programming software is needed as everything is done from the machine. The production cycle on the machine consists of a first spot welding phase to lock the tank to the surface, followed by the actual welding, a single cycle without tool changing.
Machine not used since 2018, used for about a hundred hours, practically still new, only the NC battery needs to be replaced and the back up reloaded.
There are some sink templates available that can be supplied.
LEAS technology video https://www.youtube.com/watch?v=W6MOL80-UPs
Automatikus fordítás
Közvetlen értékesítés
7 figyeli
7
Figyelő
igény szerint
Ár
Szolgáltatásaink
- Szétszerelési és összeszerelési szolgáltatás
- Az egész világra kiterjedő logisztikai hálózat
- Egyéni tanácsadás
- Segítség a szükséges dokumentumok kiállítása és a vámkezelés során