Aukció 'Machines for the Automobile Industry': sorszám 19 Egyéb iparág MAHA MSR 500 / 3 PKW Allrad Németország, 52146 Würselen

2022.01.24, 14:26
Az aukció lezárult
Hasonló termékek keresése Ugrás a listára


Van bármilyen kérdése a termék vonatkozásában? Kérjük, lépjen kapcsolatba velünk.
A gép jellemzői
Név Egyéb iparág MAHA MSR 500 / 3 PKW Allrad
Cikkszám 718499
Gyártó MAHA
Típus MSR 500 / 3 PKW Allrad
Kiemelt termék
Cikk személyes ajánlással
Gyártás éve 2017
Termék ekkortól elérhető immedaitly
Termék minősége
Helyszín Megjelenítés a térképen Németország, 52146 Würselen
Megjelenítés a térképen
Valamennyi termék ezen a helyszínen
Termék leírása
ARTICLE DESCRIPTION of the manufacturer/ article may differ!

The MSR 500/3 CAR 4WD single roller dynamometer is used in workshops for designers and tuners as well as in educational institutions. It is especially suitable for performance measurements, tuning and diagnostic work on particularly powerful vehicles. With test speeds of up to 300 km/h, it is used for dynamic and static power measurement. The MSR 500/3 CAR 4WD guarantees optimum measurement accuracy and reproducibility through the active measurement of the towing power.
The rolling behaviour of the tyre is the same as on the road. Operating methods such as load simulation, including optional modules for the measurement of external data, e.g. driving cycles, are possible.


Four-wheel drive single roller dynamometer for cars with axle
load of 2.4 t, includes two eddy-current brakes on the rear
axle with an electric motor and an eddy-current brake on the
front axle with an electric motor, ideally suited for
performance measurements, tuning and diagnostic work on very
powerful vehicles

  • Test speeds of up to 300 km/h
  • Tyre rolling action as it would be on the road
  • Tyres are preserved as a result of limited flexing action
  • Simple restraining mechanism for quick vehicle fixation
  • Electronically-controlled synchronisation of the speed of the front and rear roller set for current and future drive concepts with active power distribution

High level of flexibility in use due to extensive variety of
operating modes, covering all fields of application:

  • Static power measurement at constant RPM
  • Static power measurement at constant speed
  • Static power measurement at constant tractive force
  • Dynamic power measurement with adjustable acceleration
  • MAHA towing power measurement guarantees the highest degree of accuracy when measuring power: Precision calculation of the parasitic losses of the dynamometer, of the vehicle's drive train and the tyre to roller friction and flex losses Tachometer testing with up to ten freely selectable test points
  • Distance measurement included
  • Stopwatch function for measurement of acceleration between optional speed markers as standard
  • Optional load simulation with freely programmable load profile
  • Optional driving simulation with freely programmable speed profile
  • Option of storing programmed profiles in database

Professional, intuitive-use software for the highest expert
standards with:

  • continuous graphic display and recording of up to 16 freely selectable parameters per performance measurement cycle on one measurement screen.
  • In addition to the current performance measurement cycle, fade-in of up to three stored cycles on the measurement screen for optimum comparability during calibration work
  • Two circular dial displays for RPM and speed as well as current oil temperature display, ensuring constant control of key parameters during performance measurement
  • Determination of wheel power, power dissipation, engine power and torque
  • Standardised extrapolation of motor power in line with DIN 70020, EEC 80/1269, ISO 1585, JIS D 1001 and SAE J 1349 (configuration-dependent)


  • Circular dial display of motor power, RPM, speed and tractive force during simulation cycles
  • Colour-highlighted user prompts integrated within the circular dial facilitate the accurate reproduction of simulation cycles
  • With radio remote control as standard for complete control of the dynamometer from within the vehicle.
  • Radio remote control with long-life battery and charging station
  • Cooling fan switched on and off either at the control console or with the radio remote control


  • With interface box including stand and long connection cable as standard for optimum placement at the dynamometer with MAHA plug-in CAN-DRZ module card for connecting RPM sensor.
  • Interface box optionally upgradeable with MAHA plug-in card for comprehensive recording of external Ambient data such as air temperature, air pressure, rel. humidity and intake temperature
  • Interface box optionally upgradeable with MAHA plug-in analogue input module card with 4 sensor inputs for temperature and pressure sensors or lambda sensors.
  • Optional connection of MAHA MGT 5, MDO 2 LON and MET SERIES emission testers
  • Optional connection of Krupp/AIC fuel consumption measuring instruments for petrol- and diesel engines

MCD 2000 Communication Desk Description

  • Robust and multifunctional metal encasement
  • Integrated switch cabinet for housing electronic components
  • Lockable drawer for keypad and PC mouse and storage compartment for small items of equipment
  • VESA standard bracket for holding the all-in-one PC or PC monitor
  • Can be extended with optional PC storage compartment or side shelves
  • Varnished with high-quality powder coating: window grey, RAL 7040 (switch cabinet) anthracite grey, RAL 7016, (side faces)

MCD 2000 Standard Delivery

  • MCD 2000 Communication Desk
  • interface box 1 including stand and connection cable with plug-in environment module (CAN-PTH module) card for recording air temperature, air pressure, humidity with plug-in RPM module (CAN-DRZ module) card for RPM recording via trigger clamp, light signal sensor, piezo clamp, clamp W and TDC sensor (insertion of max. 4 modules per box possible)
  • Radio remote control for dynamometer operation with battery and charging station
  • Cooling fan control
  • Measuring program

MSR 500/3 CAR 4WD Roller Set


  • Electronically-controlled synchronisation of the speed of the front and rear roller set
  • Second eddy-current brake on the rear roller set for measurements on powerful vehicles
  • Electric motor in the centre of the roller set
  • Hydraulic power unit with self-locking cylinder
  • Cover and sliding plates, gentian blue RAL 5010
  • Axle distance adjustment via radio remote control (Standard version: rear roller is movable)
  • Optional 30 kW electric motors instead of 22 kW for synchronisation of front and rear roller set speed
  • Varnished with high-quality powder coating: Anthracite Grey, RAL 7016

Roller Set Standard Delivery:

  • Self-supporting closed roller set with an eddy-current brake for the front axle and electric motor
  • Self-supporting closed roller set with two eddy-current brakes for the rear axle and electric motor
  • Hydraulic roller set adjustment with sliding plate set for 4WD floor unit
  • Converter cabinet for electric motor control

Note : Liability for the completeness of this article can not be guaranteed despite careful examination. Fordítás megjelenítése
Automatikus fordítás
Technikai adatok
Hozzávetőleges méretek 8,000 x 2,450 x 1,800 mm
Tömeg kb. 6,000 kg
Van bármilyen kérdése a termék vonatkozásában? Kérjük, lépjen kapcsolatba velünk.
Szállítási is fizetési feltételek
Leszerelési és rakodási költségek (kötelező) 700.00 €
Szállítási költségek nem tartalmazza
Szállítási feltételek FCA Würselen, tehergépkocsira rakodva
Fizetési feltételek 100% kifizetés az elhozatalt megelőzően
Dátum Hétfő, 2022.02.07 -ig
Péntek, 2022.02.11, -tól 07:00 -ig 13:30
Surplex App okostelefonhoz
Ingyenes letöltés
iPhone & iPad
Cikkek a figyelőlistán
Elem eltávolítva. Vissza