Máquina de moldagem por injeção ARBURG Allrounder 370 S 500-100

- machine no. 21117
- closing force 500 kN
- pump motor 11 kW
- voltage 400 V / 50 Hz
- position-controlled screw
- technology level 2 with two regulating pumps for controlled machine movement
- plasticising cylinder 20 mm
- highly wear and corrosion resistant, max. processing temperature 450°
- max. injection volume 30 ccm
- Piezo-charge amplifier for internal pressure measurement
- programmable nozzle contact force
- centering diameter of nozzle side 125 mm
- ejector with quick-release coupling
- ejector stroke max. 125
- mould height min. 300
- max. distance between plates 700
- distance between columns 370 x 370
- machine-related cooling circuits programmably controlled
- 6 free cooling circuits manually adjustable
- interface for tool monitoring via ejector plate security
- blow-out device with pressure reducer
- off-line filtration
- temperature in the control cabinet controlled by water cooling
- printer interface
- interface of tempering device  20mA
- max. 6 devices
- interface for dyeing / dosing unit
- socket distributor 5 x Schuko and 5 x Cekon
- 15 electrical heating control units for tool heating (hot channel) sensor type J
- special method extended guard locking
- operating hours:
- machine cycles - 15.289.506
- operating hours of pump - 75.998
- operating hours auto - 67.992
- Mulltilift V Select transverse structure :
- Multilift V in portal construction, construction across on machine, 3 CNC axes, free programmable, axes can be driven at the same time, drive via servo motors
- axis lengths, axis speed: Z axis (transverse to the longitudinal axis of the machine) 1400 mm  3,0 mm/s
- X axis ( parallel to the longitudinal axis of the machine) 500 mm 2,0 mm/s
- Y axis ( dipping axis) 1000 mm 2,7 mm/s
- C axis pneumatic folding axis
- loading capacity max. 15 kg
- Aktionica control panel
- control of peripheral devices via the robot sequence possible
- 24 free programmable inlets
- 24 free programmable outlets
- second and third interface for querying 8 further sensors each
- 6 x  pneumatic-valves 5/3 with locked centre position for gripper functions
- 1 x vacuum equipment incl. vacuum switch for parts monitoring
- protective housing Bosch, access door electrically secured
- incl. handling/automation
- attention: without clamping devices, without conveyor belt, without material feeder / plastic granulate separator and without tools Mostrar tradução