including the control cabinet to the right
Performance data forces: Press cylinder
max. closing force: 8,000 kN,
free break-open force on the upper press table: 110 kN,
Speeds: Closing speed: 10-500 mm/s,
pressing speed: 1-38 mm/s,
tearing speed: 0.5-10 mm/s,
opening speed: 10-300 mm/s,
time for press pressure build-up: 1 s
Press cylinder dimensions: 1 piece D 600 mm,
drive cylinder: 2 pieces 190/90 mm,
hydraulics: operating pressure of hydraulics 315 bar,
main pump flow rate: 152.4 l/min,
oil tank capacity approx. 1,700 l,
operating fluid: HLP-D32,
electrical supply: 380 V, 50 Hz
Top plate dimensions: 1,500 x 1,200 mm,
opening width: maximum distance between plates 1,500 mm,
overall height above floor: approx. 7,500 mm,
travel: closing stroke 1,190 mm,
total weight: 55 t,
press frame approx. 20 t,
press ram approx. 10 t,
press cylinder approx. 2.2 t,
press plunger approx. 1.3 t
INFO: Device can be dismantled and is available at short notice
Location: A-2435 Ebergassing Mostrar tradução