1 / 27
ANAYAK PERFORMER 2500 3-Axis CNC Machining Center with Automatic Indexing Head
- Oferta curentă
- Stare
EUR
Suma totală a ofertei
Vedeți detaliile totale
Suma totală a ofertei
Vedeți detaliile totale
EUR
Suma maximă a ofertei
Vedeți detaliile totale
Suma maximă a ofertei
Vedeți detaliile totale
Specificațiile lotului
- Cantitate
- 1
- Marjă
- Nu
- Marca
- ANAYAK
- Tip
- PERFORMER 2500
- Anul de construc?ie
- 2007
- Greutatea utilajului
- 16100kg
- Dimensiunea l
- 2500mm
- Dimensiune w
- 2000mm
- Dimensiune h
- 2400mm
- Condiții de livrare
- Încărcat pe camion
Descriere
Manufacturer: ANAYAK
Model: Performer 2500
Year: 2007
Type: CNC Machining Center
A high-capacity CNC machining center for machining heavy and large parts. The machine is configured with three linear axes (X, Y, Z) and a two-axis automatic indexing head (A and B) allowing multi-sided positioning by indexing (non-simultaneous axes).
The numerical control is provided by a FANUC 18i-MB system. The spindle is equipped with a two-range gearbox transmission, suitable for high-torque machining operations.
Strokes:
• X-axis: 2,500 mm
• Y-axis: 1,000 mm
• Z-axis: 1,100 mm
Table:
• Surface area: 2,700 ×,850 mm
• Permissible load on table: 6,000 kg
Spindle:
• ISO 50 taper – DIN 69871 AD
• Power: 22 / 26 kW
• Rotational speed: 60 to 4,000 rpm
• Gearbox (2 ranges)
Feeds:
• Working feeds: up to 20 m/min
• Fast feeds: up to 10 m/min
Equipment listed by the seller:
• Automatic 2-axis A and B indexing head (hydraulic locking)
• Coolant by the 23 bar spindle centre (reported out of service)
Additional data:
• Machine weight: approx. 16,100 kg
• Power supply: 400 V – 50 Hz
• Installed power: 38 kVA
Condition: Used machine, sold according to the seller's description.
Model: Performer 2500
Year: 2007
Type: CNC Machining Center
A high-capacity CNC machining center for machining heavy and large parts. The machine is configured with three linear axes (X, Y, Z) and a two-axis automatic indexing head (A and B) allowing multi-sided positioning by indexing (non-simultaneous axes).
The numerical control is provided by a FANUC 18i-MB system. The spindle is equipped with a two-range gearbox transmission, suitable for high-torque machining operations.
Strokes:
• X-axis: 2,500 mm
• Y-axis: 1,000 mm
• Z-axis: 1,100 mm
Table:
• Surface area: 2,700 ×,850 mm
• Permissible load on table: 6,000 kg
Spindle:
• ISO 50 taper – DIN 69871 AD
• Power: 22 / 26 kW
• Rotational speed: 60 to 4,000 rpm
• Gearbox (2 ranges)
Feeds:
• Working feeds: up to 20 m/min
• Fast feeds: up to 10 m/min
Equipment listed by the seller:
• Automatic 2-axis A and B indexing head (hydraulic locking)
• Coolant by the 23 bar spindle centre (reported out of service)
Additional data:
• Machine weight: approx. 16,100 kg
• Power supply: 400 V – 50 Hz
• Installed power: 38 kVA
Condition: Used machine, sold according to the seller's description.
Detalii suplimentare
La cererea părților interesate, licitația online de utilaje pentru prelucrarea metalelor.
Dimensiunile și greutățile prezentate pentru fiecare lot sunt furnizate ca ghid și corespund condiției actuale (asamblate) a echipamentului.
Demontarea, manipularea sau ambalarea pot schimba aceste valori și pot afecta condițiile de transport.
Înainte de orice rezervare de transport, cumpărătorii sunt rugați să verifice specificațiile reale ale loturilor direct cu vânzătorul sau compania de demontare pentru a asigura o organizare corectă.
Ridicările se vor face după plata integrală a facturii și doar cu programare.
