CONCEPT LASER M2-2007-02-04 (200 W fiber laser)
- Lot:03D-W4F-1
- Berlin, DE
- Oferta curentă
- Stare
Activați Auto-Bid
Recomandat
Despre acest lot
Concept Laser M2 cusing (200 W fiber laser) – spare parts dispenser / defective system with extensive accessory package
The system was used fully productively until the failure – the laser source and scan head were finally functional. Error pattern: recurring connection loss, presumably
caused by corrupted CF card. On the part of the manufacturer (ROFIN / GE) no further diagnosis has been made due to missing backups.
The M2 cusing is an industrially proven SLM metal 3D printer for powder-based manufacturing with highly compatible features. Particularly appreciated for its open parameter control and robust machine platform for aluminum, titanium and steels.
Main technical data
• Laser power: 200 W fiber laser (cw), wavelength 1070 nm
• Build space: 250 × 250 × 280 mm
• Materials: including AlSi10Mg, AlSi12, TiAl6V4
• Layer thickness: 20–80 μm
• Scanning speed: up to 7 m/s
• Connected load: approx. 10 kW, 400 V
• Dimensions (approx.): 2700 × 1800 × 2200 mm
• Weight: approx. 2300–2600 kg
Scope of Delivery / Accessories
• M2 cusing system with laser and blower tower
• 3× aluminum plates large (used)
• 6× steel plates small (used)
• 3× titanium plates large (almost as good as new)
• 5× filter cartridges (large) for blowers
• 19 kg AlSi10Mg metal powder (used)
• 27 kg AlSi12 metal powder (used)
• 15.5 kg TiAl6V4 (used)
• Machine documentation
The system was used fully productively until the failure – the laser source and scan head were finally functional. Error pattern: recurring connection loss, presumably
caused by corrupted CF card. On the part of the manufacturer (ROFIN / GE) no further diagnosis has been made due to missing backups.
The M2 cusing is an industrially proven SLM metal 3D printer for powder-based manufacturing with highly compatible features. Particularly appreciated for its open parameter control and robust machine platform for aluminum, titanium and steels.
Main technical data
• Laser power: 200 W fiber laser (cw), wavelength 1070 nm
• Build space: 250 × 250 × 280 mm
• Materials: including AlSi10Mg, AlSi12, TiAl6V4
• Layer thickness: 20–80 μm
• Scanning speed: up to 7 m/s
• Connected load: approx. 10 kW, 400 V
• Dimensions (approx.): 2700 × 1800 × 2200 mm
• Weight: approx. 2300–2600 kg
Scope of Delivery / Accessories
• M2 cusing system with laser and blower tower
• 3× aluminum plates large (used)
• 6× steel plates small (used)
• 3× titanium plates large (almost as good as new)
• 5× filter cartridges (large) for blowers
• 19 kg AlSi10Mg metal powder (used)
• 27 kg AlSi12 metal powder (used)
• 15.5 kg TiAl6V4 (used)
• Machine documentation
- Observații:
- The machine has a documented defect:
"No stable communication between GUI and RCU – possible data loss on CF card."
Sold expressly as a defective / spare parts dispenser. No functional guarantee.
Suitable for repairers, spare parts acquisition or, if necessary, refurbishment at your own expense.
- Numărul lotului:
- 03D-W4F-1
- Locație:
- Berlin, DE
- Vândut de catre:
- Vânzător companie
Specificațiile lotului
- Cantitate
- 1
- Marjă
- Nu
- Marca
- Concept Laser GmbH
- Tip
- M2-2007-02-04
- Anul de construc?ie
- 2007
- Manual prezent
- Da
- Condiții de livrare
- Ex fundație-neambalat
este posibil să vă intereseze acestea
