DECKEL MAHO DMC 65V CNC Universal Machining Centers
- Lot:03E-7JN-1
- Steinen, DE
- Oferta curentă
- Stare
Activați Auto-Bid
Recomandat
Despre acest lot
Deckel Maho DMC 65V – Vertical CNC Machining Center (used)
For sale is a vertical CNC milling machine of the type DMC 65V from the manufacturer Deckel Maho, equipped with a Heidenhain control system. The machine is technically in operational condition overall, but has a defect in the sensor of the tool clamper. The spindle clamping works, but the control system sometimes does not recognize the tool correctly. Repair is possible for expert users.
The machine was used to process graphite materials – accordingly, deposits are visible in the working area, but the machine is structurally in good condition.
⸻
Technical data (from nameplate and sighting):
• Type: DMC 65V
• Serial number: 6586001682
• Control: Heidenhain CNC
• Voltage: 400 V / 50–60 Hz
• Power consumption: 60 kVA
• Total operating hours: 37,351 h
• Spindle running time: 1,688 h
⸻
Equipment:
• Automatic tool changer (sensor defective)
• T-slot clamping table with vise
• Coolant lines and interior lighting
• Control panel with screen and emergency stop
• Hand control unit (electric handwheel)
⸻
Accessories included:
• Large tool set with milling heads and holders (see photos)
• Various SK or HSK tool holders, clamping devices, tension wrenches
• Tool stands and accessories for set-up time optimization
For sale is a vertical CNC milling machine of the type DMC 65V from the manufacturer Deckel Maho, equipped with a Heidenhain control system. The machine is technically in operational condition overall, but has a defect in the sensor of the tool clamper. The spindle clamping works, but the control system sometimes does not recognize the tool correctly. Repair is possible for expert users.
The machine was used to process graphite materials – accordingly, deposits are visible in the working area, but the machine is structurally in good condition.
⸻
Technical data (from nameplate and sighting):
• Type: DMC 65V
• Serial number: 6586001682
• Control: Heidenhain CNC
• Voltage: 400 V / 50–60 Hz
• Power consumption: 60 kVA
• Total operating hours: 37,351 h
• Spindle running time: 1,688 h
⸻
Equipment:
• Automatic tool changer (sensor defective)
• T-slot clamping table with vise
• Coolant lines and interior lighting
• Control panel with screen and emergency stop
• Hand control unit (electric handwheel)
⸻
Accessories included:
• Large tool set with milling heads and holders (see photos)
• Various SK or HSK tool holders, clamping devices, tension wrenches
• Tool stands and accessories for set-up time optimization
- Observații:
- Condition:
• Used condition with typical optical wear
• Traces of processing due to graphite – cleaning recommended
• Sensor of the tool clamp defective, therefore sold expressly as used and partially defective
• Ideal for experienced repairers or as a cost-effective production solution after repair
- Numărul lotului:
- 03E-7JN-1
- Locație:
- Steinen, DE
- Vândut de catre:
- Vânzător companie
Specificațiile lotului
- Cantitate
- 1
- Marjă
- Nu
- Marca
- Deckel Maho
- Tip
- DMC 65V
- Anul de construc?ie
- 2000
- Numarul de serie
- 08850001682
- Conicitate iso
- SK40
- Deplasare pe axa x
- 650mm
- Deplasare pe axa y
- 500mm
- Deplasare pe axa z
- 500mm
37.949 kg
CO₂e
Atât de mult poți economisi la emisiile de dioxid de carbon dacă alegi să cumperi acest produs folosit, în loc de unul nou.Pentru comparație, un zbor Berlin - Lisabona corespunde cu 169 kg CO₂e per pasager.
este posibil să vă intereseze acestea
