DECKEL MAHO DMU 50 Evolution CNC Universal Machining Centers
- Lot:03E-8HQ-1
- Steinen, DE
- Oferta curentă
- Stare
Activați Auto-Bid
Recomandat
Despre acest lot
For sale is a used DMU 50 eVolution, built in 1998, equipped with the Heidenhain TNC 426 controller and a high-frequency spindle up to 30,000 rpm. The machine was used in an air-conditioned environment primarily for processing graphite electrodes – ideal for applications in tool and mold making.
Technical key data:
• Year of manufacture: 1998
• Control: Heidenhain TNC 426
• Spindle speed: up to 30,000 rpm
• Axes: 5-axis simultaneous machining
• Taper mount: ISO/SK40
• Automatic tool changer
• Coolant pump & chip conveyor available
Machine Condition:
The machine is fully functional, but with visible signs of wear according to the year of manufacture. The interior and guides show deposits due to graphite processing, which should be taken into account during commissioning. The spindle runs, but is not freshly overhauled. Due to the high speed, the machine is particularly suitable for ultra-fine machining (e.g. graphite, plastic, aluminum).
Example:
The machine was mainly used to produce electrodes for the EDM process. Thanks to the high spindle speed and simultaneous 5-axis kinematics, it is ideally suited for the finest contours, hollow shapes and complex free-form surfaces.
Operating hours (according to the display):
• Control on: approx. 29,788 h
• Machine on: approx. 97,719 h
• Program run: approx. 36,831 h
Technical key data:
• Year of manufacture: 1998
• Control: Heidenhain TNC 426
• Spindle speed: up to 30,000 rpm
• Axes: 5-axis simultaneous machining
• Taper mount: ISO/SK40
• Automatic tool changer
• Coolant pump & chip conveyor available
Machine Condition:
The machine is fully functional, but with visible signs of wear according to the year of manufacture. The interior and guides show deposits due to graphite processing, which should be taken into account during commissioning. The spindle runs, but is not freshly overhauled. Due to the high speed, the machine is particularly suitable for ultra-fine machining (e.g. graphite, plastic, aluminum).
Example:
The machine was mainly used to produce electrodes for the EDM process. Thanks to the high spindle speed and simultaneous 5-axis kinematics, it is ideally suited for the finest contours, hollow shapes and complex free-form surfaces.
Operating hours (according to the display):
• Control on: approx. 29,788 h
• Machine on: approx. 97,719 h
• Program run: approx. 36,831 h
- Observații:
- The machine is in a functional, used condition, but has been visibly stressed due to its age and intensive use in graphite machining. It was in use until the end, is basically ready for operation and is ideal for simple or preparatory machining tasks, especially in toolmaking.
- Numărul lotului:
- 03E-8HQ-1
- Locație:
- Steinen, DE
- Vândut de catre:
- Vânzător companie
Specificațiile lotului
- Cantitate
- 1
- Marjă
- Nu
- Marca
- Deckel Maho
- Tip
- DMU 50 Evolution
- Anul de construc?ie
- 1998
- Numarul de serie
- 11045612534
- Conicitate iso
- SK40
- Deplasare pe axa x
- 500mm
- Deplasare pe axa y
- 450mm
- Deplasare pe axa z
- 400mm
37.949 kg
CO₂e
Atât de mult poți economisi la emisiile de dioxid de carbon dacă alegi să cumperi acest produs folosit, în loc de unul nou.Pentru comparație, un zbor Berlin - Lisabona corespunde cu 169 kg CO₂e per pasager.
este posibil să vă intereseze acestea
