GILDEMEISTER CTX 410 CNC Lathe - 2008
- Lot:A7-36688-9
- Licitație:Mașini de înaltă calitate și multe altele pentru prelucrarea metalelor
- Boxberg, DE
- Oferta curentă
- Stare
Activați Auto-Bid
Recomandat
Despre acest lot
3800 x 2700 x
Machine number: 01360009611
Operating voltage: 400 V
Frequency: 50 Hz
Rated current: 80 A
Connection: 44 kVA
Control: FANUC 32i
Max. circumferential diameter: 505 mm
Circumferential diameter via X-guide: 365 mm
Max. turning diameter: 320 mm
Max. turning length: 600 mm
Main spindle:
Spindle head diameter: 170 mm
Rod diameter: max. 65 mm
Spindle diameter in the front bearing: 130 mm
Spindle bore: 87 mm
Chuck diameter: 200/250 mm
Spindle speed: 5000 rpm
C-axis speed: 200 rpm
Position accuracy: 0.04°
Sub-spindle:
Spindle head diameter: 140 mm
Bar diameter: 36 mm
Chuck diameter: 160 mm
Spindle diameter in the front bearing: 90 mm
Spindle bore: 44.5 mm
Drive power: 7.5 kW
Spindle speed: 6000 rpm
C-axis (sub-spindle):
Speed: 150 rpm
Pitch accuracy: 0.025°
Travel:
X: 250 mm
Z: 635 mm
Y: +/- 40 mm
Rapid traverse:
X: 24 m/min
Y: 10 m/min
Z: 30 m/min
Feed force:
X: 4 kN
Y: 10 kN
Z: 6 kN
Sub-spindle longitudinal travel Z2: 651 mm
Rapid traverse speed Z2: 30 m/min
Tool Carrier Tool Count: 12
Shaft diameter: VDI 30
Number of powered tools: 12
Speed range of the driven tools: 4000 rpm
Incl. lots of collets, a chip conveyor, documentation
Attention: In 2017, several overhaul works were carried out by D.Mori, including the newly stored spindle box being built and connected, clamping cylinders installed and aligned, Spika directed to the sub-spindle, geometry turret checked
X-axis: 0.003 mm
Operating voltage: 400 V
Frequency: 50 Hz
Rated current: 80 A
Connection: 44 kVA
Control: FANUC 32i
Max. circumferential diameter: 505 mm
Circumferential diameter via X-guide: 365 mm
Max. turning diameter: 320 mm
Max. turning length: 600 mm
Main spindle:
Spindle head diameter: 170 mm
Rod diameter: max. 65 mm
Spindle diameter in the front bearing: 130 mm
Spindle bore: 87 mm
Chuck diameter: 200/250 mm
Spindle speed: 5000 rpm
C-axis speed: 200 rpm
Position accuracy: 0.04°
Sub-spindle:
Spindle head diameter: 140 mm
Bar diameter: 36 mm
Chuck diameter: 160 mm
Spindle diameter in the front bearing: 90 mm
Spindle bore: 44.5 mm
Drive power: 7.5 kW
Spindle speed: 6000 rpm
C-axis (sub-spindle):
Speed: 150 rpm
Pitch accuracy: 0.025°
Travel:
X: 250 mm
Z: 635 mm
Y: +/- 40 mm
Rapid traverse:
X: 24 m/min
Y: 10 m/min
Z: 30 m/min
Feed force:
X: 4 kN
Y: 10 kN
Z: 6 kN
Sub-spindle longitudinal travel Z2: 651 mm
Rapid traverse speed Z2: 30 m/min
Tool Carrier Tool Count: 12
Shaft diameter: VDI 30
Number of powered tools: 12
Speed range of the driven tools: 4000 rpm
Incl. lots of collets, a chip conveyor, documentation
Attention: In 2017, several overhaul works were carried out by D.Mori, including the newly stored spindle box being built and connected, clamping cylinders installed and aligned, Spika directed to the sub-spindle, geometry turret checked
X-axis: 0.003 mm
- Numărul lotului:
- A7-36688-9
- Locație:
- Boxberg, DE
- Vândut de catre:
- Vânzător companie
Specificațiile lotului
- Cantitate
- 1
- Marjă
- Nu
- Marca
- GILDEMEISTER
- Tip
- CTX 410
- Anul de construc?ie
- 2008
- Greutatea utilajului
- 5500kg
- Dimensiunea l
- 4300mm
- Dimensiune w
- 1800mm
- Dimensiune h
- 1800mm
- Condiții de livrare
- Încărcat pe camion
Documente
Atenție, vă rog!
Colecție:
13.10. - 24.10.2025
Toate articolele sunt vândute ca fiind folosite și neinspectate, cu excepția cazului în care se specifică altfel.
Vă rugăm să consultați descrierea articolului.
39.414 kg
CO₂e
Atât de mult poți economisi la emisiile de dioxid de carbon dacă alegi să cumperi acest produs folosit, în loc de unul nou.Pentru comparație, un zbor Berlin - Lisabona corespunde cu 169 kg CO₂e per pasager.
MAI MULT DE LA
Aceeași Licitație
este posibil să vă intereseze acestea
