1 / 21
HOMAG Optimal KAL 310/6/A3/S2 - Edge banding machine (2009)
- Oferta curentă
- Stare
Specificațiile lotului
- Cantitate
- 1
- Marjă
- Nu
- Marca
- Homag
- Tip
- Optimal KAL 310/6/A3/S2
- Anul de construc?ie
- 2009
- Numarul de serie
- O-200-24-9150
- Grosimea panoului
- 50mm
- Grosimea benzii de margine
- 3mm
- Înal?imea benzii de margine
- 50mm
- Lungimea min. a piesei de prelucrat
- 140mm
- La?imea min. a piesei de prelucrat
- 60mm
- Rata de alimentare
- 18m/min
- Unitate ferastrau
- Da
- Unitate de pre-frezare
- Da
- Unitatea principala de frezare
- Da
- Unitate de rotunjire col?uri
- Da
- Unitate de razuire
- Da
- Unitate de lustruit
- Da
- Conexiune electrica
- 400V
- Manual prezent
- Da
- Greutatea utilajului
- 3200kg
- Dimensiunea l
- 7000mm
- Dimensiune w
- 1100mm
- Dimensiune h
- 1600mm
- Codurile SA
- 84659200
- Condiții de livrare
- Ex fundație-neambalat
Descriere
HOMAG Optimat KAL 310/6/A3/S2 (YOC 2009)
Industrial edge banding machine – well-maintained, fully functional
Operating hours: 17,556 h
Special features: Processing of white and transparent glue, new phase/joint milling unit, integrated GROOVE unit
This Homag KAL 310 offers a robust, reliable solution for precise edge processing in industrial use. The machine comes from ongoing production and has been regularly maintained. The possibility of processing both white and transparent glue makes it ideal for high-quality visible edges.
The newly installed phase and joint milling unit significantly increases machining quality and reduces future maintenance costs. In addition, the NUT unit expands the range of application of the machine and enables additional processing steps directly in the flow.
Equipment (excerpt):
– Pre-milling unit
– Main milling unit
– Corner rounder
– Scraper unit
– Polishing unit
– Sawing unit
– Automatic feeding
– Documentation completely available
The stable design, Homag-typical precision and extensive equipment make this machine the ideal solution for joinery, furniture manufacturers and industrial companies that value reliability, flexibility and high edge quality.
Operating hours: 17,556 h
Special features: Processing of white and transparent glue, new phase/joint milling unit, integrated GROOVE unit
This Homag KAL 310 offers a robust, reliable solution for precise edge processing in industrial use. The machine comes from ongoing production and has been regularly maintained. The possibility of processing both white and transparent glue makes it ideal for high-quality visible edges.
The newly installed phase and joint milling unit significantly increases machining quality and reduces future maintenance costs. In addition, the NUT unit expands the range of application of the machine and enables additional processing steps directly in the flow.
Equipment (excerpt):
– Pre-milling unit
– Main milling unit
– Corner rounder
– Scraper unit
– Polishing unit
– Sawing unit
– Automatic feeding
– Documentation completely available
The stable design, Homag-typical precision and extensive equipment make this machine the ideal solution for joinery, furniture manufacturers and industrial companies that value reliability, flexibility and high edge quality.
Observații
The Homag Optimat KAL 310/6/A3/S2 is in a well-maintained, fully functional condition and comes from an ongoing production plant. The machine has been regularly serviced and, with 17,556 operating hours, has a normal range of use for this model. All essential functions have been tested and work reliably.
The phase and joint milling unit was recently renewed, which has significantly increased both the precision of edge processing and operational reliability. The NUT unit is fully functional and expands the scope of processing without restrictions.
The machine processes white and transparent glue, without any abnormalities or loss of function. The milling, sawing, round and polishing units run smoothly, the feed chain works evenly. The control system responds perfectly, monitor and controls are fully functional.
Visually, the machine shows signs of age and use, such as slight soiling, adhesion in the area of the gluing station and minor paint scratches. However, these do not affect the function. Housing parts, protective covers and extraction connections are complete and intact.
Overall, the machine presents itself as a well-maintained, ready-to-use industrial plant that offers an above-average working condition due to the new units, the additional glue options and the complete equipment.
The phase and joint milling unit was recently renewed, which has significantly increased both the precision of edge processing and operational reliability. The NUT unit is fully functional and expands the scope of processing without restrictions.
The machine processes white and transparent glue, without any abnormalities or loss of function. The milling, sawing, round and polishing units run smoothly, the feed chain works evenly. The control system responds perfectly, monitor and controls are fully functional.
Visually, the machine shows signs of age and use, such as slight soiling, adhesion in the area of the gluing station and minor paint scratches. However, these do not affect the function. Housing parts, protective covers and extraction connections are complete and intact.
Overall, the machine presents itself as a well-maintained, ready-to-use industrial plant that offers an above-average working condition due to the new units, the additional glue options and the complete equipment.
