MELTEC - ZC 200/250 - Industrial Furnace

General information

Manufacturer: MELTEC Industrieofenbau GmbH
Furnace type: ZC 200/250
Oven No.: 1194/01
Year of manufacture: 10/2001
Weight: 600 kg
Construction: robust industrial furnace for the heat treatment of metals, suitable for continuous operation in foundries, forges or metalworking plants.

Electrical data:

Supply voltage: 3x 380–480 V (three-phase current)
Mains frequency: 50/60 Hz
Nominal current consumption: 49–63 A
Heating capacity (continuous): 32.5 – 36 kW
Connected load (maximum): 32.5 – 52 kW
Fuse: according to the current consumption, an industrial high-current supply is required.

Thermal data:

Maximum operating temperature: 450 °C
Application: Heating, preheating and heat treatment of metal parts and materials.
Control: via integrated temperature control (not visible in detail in the pictures, but provided).

Structure and mechanics:

Furnace housing: steel construction, insulated, mounted on a stable base frame.
Chamber size: suitable for type ZC 200/250 (exact internal dimensions not indicated on the nameplate, manufacturer's documents required).
Cable and media routing: side-mounted ducts and hose systems for power and signal supply.
Installation: on foundation in the production area (ground anchors and guide rails visible).
Total weight: 600 kg, therefore transport only possible by crane or forklift.

Control & Operation:

Control panel:
Equipped with push buttons, rotary switches and signal LEDs.
Emergency stop switch (red, large): central safety shutdown.
Green push buttons: Start functions, process control, individual operating modes.
Switches / rotary selector switches: Selection of different operating modes (e.g. heat-up, hold, cool-down).
On/off switch: separate main switch for operation.