MSM Vacuum press 2021 8300 x 3300mm press area

Table inner dimensions 8300 x 3300mm (press surface)
Table load capacity 500kg (surface load)
Total installation dimensions of the baler 10.2 x 3.7 x 3.0m
Total weight of the press approx. 2700kg
Connected load 9 KW
400 Volt All parts powder-coated
Table RAL 7035
Membrane frame RAL 7011
Pressure differential switch for displaying and adjusting the negative pressure system and pressing pressure

Vacuum press VMP 8333 consisting of: Table base made of welded

Tubular steel construction consisting of 5 bolted lightweight segments with adjustable feet for height adjustment,
Table covering made of 22mm grey on both sides coated MDF board with 8 Suction Holes 19mm,
Slotted board made of 10mm MDF raw with Grid grooves 80x80mm on the underside for air distribution, (protection + wear plate)

Vertically opening membrane frame made of Welded tubular steel construction with Diaphragm quick-change device (quick release for diaphragm clamping), Natural rubber membrane 2mm, 700% Elongation, Color Black,
membrane frame with four screw stroke columns mounted on the short side,
Lifting height maximum 1500mm,
Lifting speed open/close 40/40 Sec.,

Circumferential safety contact strip with Safety relays as crush protection,
4 pieces of NOT STOP switch on the Table corners,
Vacuum supply by oil-lubricated Vacuum pump with 250m³ suction power, Maximum vacuum -0.99 bar Vacuum control with 3-way solenoid valve,
Digital pressure differential switch for Vacuum control,
2 pieces 250 liter vacuum storage tank,
Operation of the vacuum press on the free-standing Control panel,
Main switch for switching on,
NOT STOP switch,
2-hand operation for opening and closing of the membrane frame,
Push button for vacuum and ventilation