1 / 6
ZIRBUS Steam Sterilizer HST 23/20 S Sterilization Technology (2005)
- Oferta curentă
- Stare
Specificațiile lotului
- Cantitate
- 1
- Marjă
- Nu
- Marca
- Zirbus Dampfsterilisator
- Tip
- HST 23/20 S
- Anul de construc?ie
- 2005
- Capacitatea numarului de instrumente
- 2pcs
- Model de masa
- Da
- Control digital
- Da
- Conexiune electrica
- 230V
- Greutatea utilajului
- 50kg
- Dimensiunea totala L
- 600mm
- Dimensiunea totala W
- 550mm
- Dimensiunea totala H
- 450mm
- Codurile SA
- 84192000
- Condiții de livrare
- Ex fundație-neambalat
Descriere
ZIRBUS Steam Sterilizer HST 23/20 S – Laboratory Benchtop Autoclave
The offered ZIRBUS HST 23/20 S is a compact, robustly built steam sterilizer for laboratory and medical applications. The device has a manual door lock, a stainless steel pressure chamber and a digital control and display unit to monitor temperature, time and pressure. The compact dimensions allow it to be used on work benches or laboratory shelves, ideal for smaller sterilization batches.
The control indicates readiness for operation, all controls react, and the chamber can be opened and closed cleanly. The device shows signs of optical wear typical of regular laboratory use. The seal of the chamber is in place, and the lock works mechanically perfectly.
There is a "Device locked" message on the device. This indicates that the last safety check or validation did not pass or expired. Therefore, the autoclave is offered without a functional warranty. A new test by a specialist company is required before the device can be used again in a medical or laboratory-relevant environment.
Equipment and features:
– Tabletop model, stainless steel housing
– Digital temperature and pressure display
– Manual chamber locking
– Inner chamber for small to medium sterilization quantities
– Compact design, suitable for laboratory environments
The control indicates readiness for operation, all controls react, and the chamber can be opened and closed cleanly. The device shows signs of optical wear typical of regular laboratory use. The seal of the chamber is in place, and the lock works mechanically perfectly.
There is a "Device locked" message on the device. This indicates that the last safety check or validation did not pass or expired. Therefore, the autoclave is offered without a functional warranty. A new test by a specialist company is required before the device can be used again in a medical or laboratory-relevant environment.
Equipment and features:
– Tabletop model, stainless steel housing
– Digital temperature and pressure display
– Manual chamber locking
– Inner chamber for small to medium sterilization quantities
– Compact design, suitable for laboratory environments
Observații
The steam sterilizer is in a used, visually age-appropriate condition. The stainless steel case shows common signs of wear such as discoloration, debris and light scratches. The door mechanism can be opened and closed, and the chamber seal is present. The interior and locking show typical traces of regular use, but no recognizable structural damage.
The digital control switches on, displays light up and control buttons respond. However, a full sterilization run has not been tested. There is a red "Device locked" message on the device, indicating a pending or failed safety check or validation. For this reason, the device is offered without a functional guarantee.
The technical components such as heating, pressure build-up and drain valves were not tested. Connections and external components are completely in place. No missing housing parts recognizable.
Overall, it is a functional device with visible signs of use but unconfirmed sterilization function. An overhaul or safety test by a specialist company is required before the steriliser can be used again as intended.
The digital control switches on, displays light up and control buttons respond. However, a full sterilization run has not been tested. There is a red "Device locked" message on the device, indicating a pending or failed safety check or validation. For this reason, the device is offered without a functional guarantee.
The technical components such as heating, pressure build-up and drain valves were not tested. Connections and external components are completely in place. No missing housing parts recognizable.
Overall, it is a functional device with visible signs of use but unconfirmed sterilization function. An overhaul or safety test by a specialist company is required before the steriliser can be used again as intended.
