Surplex-ovi rabljeni stroji
Kupi Surplex Trust

Dražba 'Surplex Woodworking Auction (February I)': serijska št. 3 KUPER SWT XL-6 Planing and Moulding Machine

Čas zaključka
06.02.2020, 10:02 Ura
čez 13 dan/dni 13 h
Osveži
Prosimo, prijavite se
Opazuj
Trenutna najvišja ponudba:
0
0 ponudbe
Izklicna cena:
45,000
0 ponudbe
Ponudi zdaj
Leto izdelave: 2017
Stroj na voljo od: immediately
Kakovost stroja: dobro
Lokacija: Nemčija, 33397 Rietberg

Podrobnosti

Kalkulator skupne cene
Natisni
Ali imate kakršno koli vprašanje v zvezi z napravo? Obrnite se na nas.
Maximilian Berger

Maximilian Berger
Telefon: +49 211422737866
Mobilni telefon: +49 1742417737
E-pošta: maximilian.berger@surplex.com

Ime: KUPER SWT XL-6 Planing and Moulding Machine
Številka stroja: 558240
Proizvajalec: KUPER
Model / Vrsta: SWT XL-6
KUPER SWT XL-6 Planing and Moulding Machine
demonstration machine

technical data:
working width (perimeter of tools 125 mm): 15 - 250 mm
working height(perimeter of tools 125 mm): 10 - 150 mm

The processing of the work pieces is depending on the following operating parameters:
material, wood moisture, tools, diameter of the chip removal and feed speed.
If necessary adjustments to the operating parameter have to be done.

1st spindle: HORIZONTAL, BOTTOM 

Siemens IE3 Spindle motor with electronical brake:   5,5 kW (7,5 HP)
___________________________________________________________________________
diameter:                                            40 mm
___________________________________________________________________________
length:                                               275 mm
___________________________________________________________________________
drive:                                                  6.000 rpm
___________________________________________________________________________
perimeter of tools:                              125 - 160 mm
___________________________________________________________________________
reference cutter:                                diameter difference 20 - 25 mm to the cutter head
                                                    Machine can't work without reference cutter head
___________________________________________________________________________
connecting piece:                                    D = 125 mm
___________________________________________________________________________
quick action lock nut:                               Pro-Lock

2nd spindle: VERTICAL, RIGHT

Siemens IE3 Spindle motor with electronical brake:   5,5 kW (7,5 HP)
___________________________________________________________________________
diameter:                                            40 mm
___________________________________________________________________________
length:                                               170 mm
___________________________________________________________________________
drive:                                                  8.000 rpm
___________________________________________________________________________
perimeter of tools:                              112 - 200 mm
___________________________________________________________________________
adjustment path axial:                        60 mm
___________________________________________________________________________
adjustable table plate to tool radius
___________________________________________________________________________
standard profile depth:                       20 mm
___________________________________________________________________________
connecting piece:                               D = 125 mm
___________________________________________________________________________
aspiration:                                          individual adjustable shavings guiding plate
___________________________________________________________________________
quick action lock nut:                           Pro-Lock
___________________________________________________________________________
motorized adjustment system:              axial direction
- backlash-free adjustment via ballscrew
- position measurement directly from the encoder to the adjusting spindle  
___________________________________________________________________________
electric dual display:                               radial
- settings are specified by the program


3rd spindle: VERTICAL, LEFT

Siemens IE3 Spindle motor with electronical brake:   7,5 kW (10 HP)
___________________________________________________________________________
diameter:                                            40 mm
___________________________________________________________________________
length:                                              170 mm
___________________________________________________________________________
drive:                                               8.000 rpm
___________________________________________________________________________
perimeter of tools:                                  112 - 200 mm
___________________________________________________________________________
adjustment path axial:                               60 mm
___________________________________________________________________________
standard profile depth:                              20 mm
___________________________________________________________________________
adjustable table plate to tool radius
___________________________________________________________________________
connecting piece:                                    D = 125 mm
___________________________________________________________________________
aspiration:                                              individual adjustable shavings guiding plate
___________________________________________________________________________
quick action lock nut:                              Pro-Lock
___________________________________________________________________________
motorized adjustment system:                axial direction
- backlash-free adjustment via ballscrew
- position measurement directly from the encoder to the adjusting spindle  
___________________________________________________________________________
motorized adjustment system:                 radial direction
- backlash-free adjustment via ballscrew
- position measurement directly from the encoder to the adjusting spindle  
___________________________________________________________________________
opposite feed rollers axial 35 mm adjustable
- to be able to optimally respond quickly to various profiles or profile widths

4th spindle: HORIZONTAL, TOP 

Siemens IE3 Spindle motor with electronical brake:   7,5 kW (10 HP)
___________________________________________________________________________
diameter:                                            40 mm
___________________________________________________________________________
length:                                              260 mm
___________________________________________________________________________
drive:                                               8.000 rpm
___________________________________________________________________________
perimeter of tools:                                  112 - 200 mm
___________________________________________________________________________
adjustment range axial:                          40 mm
___________________________________________________________________________
pressure shoe:                                       pneumatically, via linear guides dynamically adjustable
___________________________________________________________________________
standard profile depth:                              20 mm
___________________________________________________________________________
connecting piece:                                    D = 125 mm
___________________________________________________________________________
aspiration:                                          individual adjustable shavings guiding plate
___________________________________________________________________________
quick action lock nut:                               Pro-Lock
___________________________________________________________________________
motorized adjustment system:                     axial direction
- backlash-free adjustment via ballscrew
- position measurement directly from the encoder to the adjusting spindle  
___________________________________________________________________________
motorized adjustment system:                         radial direction
- backlash-free adjustment via ballscrew
- position measurement directly from the encoder to the adjusting spindle  
___________________________________________________________________________
pressure shoe crosswise controlled

5th spindle: HORIZONTAL, TOP

Siemens IE3 Spindle motor with electronical brake:   7,5 kW (10 HP)
___________________________________________________________________________
diameter:                                            40 mm
___________________________________________________________________________
length:                                              260 mm
___________________________________________________________________________
drive:                                               8.000 rpm
___________________________________________________________________________
perimeter of tools:                                  112 - 200 mm
___________________________________________________________________________
adjustment range axial:                              40 mm
___________________________________________________________________________
pressure lips:                                       extra-long and pneumatically adjustable    
___________________________________________________________________________
pressure shoe:                                       pneumatically, via linear guides dynamically adjustable
___________________________________________________________________________
standard profile depth:                              20 mm
___________________________________________________________________________
connecting piece:                                    D = 125 mm
___________________________________________________________________________
aspiration:                                          individual adjustable shavings guiding plate
___________________________________________________________________________
quick action lock nut                               Pro-Lock
___________________________________________________________________________
motorized adjustment system:                         axial direction
- backlash-free adjustment via ballscrew
- position measurement directly from the encoder to the adjusting spindle  
___________________________________________________________________________
motorized adjustment system:                         radial direction
- backlash-free adjustment via ballscrew
- position measurement directly from the encoder to the adjusting spindle  
___________________________________________________________________________
glassbar splitter:
- pressure shoe crosswise controlled
- splitter
- kickback protection

6th spindle: HORIZONTAL, BOTTOM

Siemens IE3 Spindle motor with electronical brake:  5,5 kW (7,5 HP)
___________________________________________________________________________
diameter:                                            40 mm
___________________________________________________________________________
length:                                              260 mm
___________________________________________________________________________
drive:                                               8.000 rpm
___________________________________________________________________________
perimeter of tools:                                  112 - 200 mm
___________________________________________________________________________
connecting piece:                                    D = 125 mm
___________________________________________________________________________
aspiration:                                          individual adjustable shavings guiding plate
___________________________________________________________________________
standard profile depth:                              20 mm
___________________________________________________________________________
quick action lock nut:                               Pro-Lock
___________________________________________________________________________
motorized adjustment system:                         axial direction
- backlash-free adjustment via ballscrew
- position measurement directly from the encoder to the adjusting spindle  

FEEDSYSTEM

chainless, each roller unit has its own gearing with universal shaft to the feed rollers.
feed motor with electronical brake:                  4 kW
speed variable by frequency converter:           6 - 24 m/min.
motor (hight adjustment):                                  0,55 kW

Two driven infeed roller upstream of the first bottom spindle can be pneumatically raised and lowered via selector switch.

Short roller distance swivelling from top, in opposite to the right spindle for an easy tool change.

electrical positioning for the feed beam

ELECTRIC

400 Volt/3 PH/PE
3-pole main switch, 50 Cy, IP 54
Iinstallation according to the current standards


MACHINE BASIC STAND, TABLES AND GUIDES

heavy construction of the basic stand,
torsion free and low vibration

infeed table 2.500 mm long, hard chromium plated
                      
1 driven, double mounted roller in the infeed table and in machine end table

manual lubricant pump

PRESSURE ELEMENTS AND GUIDANCES

lateral pressure roller in the infeed table, spring mounted
lateral pressure of the roller before the left spindle, revolving and spring mounted

addtional ruler (height adjustable) behind left spindle

height of the fence in the machine 25 - 30 mm, with lengthwise adjustable lipps in the range of right spindles

left wide controlled pressure ruler

MACHINE MAINTENANCE

The main lubricating points are grouped centrally at the front of the machine.
Each guidance has a separate nipple.
Lubrication intervals are marked by colored markings.

Comfort control K2 Professional

- Siemens 9" color touch screen
- easy management of the programs
- graphical user interface
- for each program and tool drawings or photos can be stored
- additional 3.5 " screen at the front of the machine to show the present
- set - position and the need tool radius for the program  
  (per motorized spindle)
- simplified set / correction by dynamic jogging function of the
  positioning motor
- independent surface for a quick change of the four side dimensions


SECURITY

LED light inside the security cover.

machine in accordance with the valid CE standards, supplied with operating tools however without processing tools


COLOURS

RDS 2408005
RAL 7024

*** without tools ***
serijska številka: K810-03185
delovna površina: 15-250 mm
višina skobljanja: 10-150 mm
dolžina površine mize: 2,500 mm
število vreten: 6
1. vreteno: horizontal unten 5,5kW
2. vreteno: vertikal rechts 5,5kW
3. vreteno: vertikal links 7,5
4. vreteno: horizontal oben 7,5kW
5. vreteno: horizontal oben 7,5kW
6. vreteno: horizontal unten 5,5kW
premer vretena: 40 mm
podajanje: 6-24 m/min
Približne mere: 6,000 x 2,000 x 2,000 mm
Približna teža: 6,000 kg
Ali imate kakršno koli vprašanje v zvezi z napravo? Obrnite se na nas.
Maximilian Berger

Maximilian Berger
Telefon: +49 211422737866
Mobilni telefon: +49 1742417737
E-pošta: maximilian.berger@surplex.com

provizija dražbe: 15%
DDV: *plus DDV
Pogoji dostave: FCA Rietberg, naloženo na dostavno vozilo
Cena demontiranja in nalaganja: 1,000€ (binding)
Cena prevoza: ne vsebuje
Pogoji plačila: 100% plačilo pred prevzemom
Surplex-ova aplikacija za mobilne dražbe!
Brezplačen prenos:
iPhone in iPad
Android

Stroji, ki ste si jih nazadnje ogledali

Opazovalni seznam
Element je bil odstranjen. Razveljavi