"- Serial number: 402/03
- Work area:
- Max. turning diameter: 520 mm
- Max. swing diameter: 560 mm
- Max. tool swing diameter: 695 mm
- Z-axis travel: 600 mm
- X-axis: 260 mm
- Max. spindle distance: 1460 mm
- Spindles 1/2:
- Spindle head: DIN55026-A8
- Max. passage for rolled material: 82 mm
- Max. passage for bare material: 85 mm
- Spindle diameter in the front bearing: 130 mm
- Diameter of the mounted chuck: 250 mm
Important note: The second chuck is still being assembled (no second chuck can be seen in the photos).
A three-jaw chuck with a diameter of 250 mm is installed on the right side.
Axes:
Max. feed force:
Z-axis: 13.6 kN
X-axis: 7.2 kN
Rapid traverse speed:
Z-axis: 15 m/min
X-axis: 12 m/min
Tool turret 1/2 according to DIN69880
Shaft diameter: 40 mm
Number of powered stations: 12 + 12
Both turrets can accommodate powered tools.
Max. speed: 3000 rpm
C1 axis present
With technical documentation, as shown in the pictures.
Accessories: 5 tool holders without turning tools etc. (chip-removing tools)
" Visa översättning