Borrmaskin med genommatning REM - MAHROS - OMAL OVER RS / Runner / INSERT LINEA 2000

Borrmaskin med genommatning REM - MAHROS - OMAL OVER RS / Runner / INSERT LINEA 2000
Namn
Borrmaskin med genommatning REM - MAHROS - OMAL OVER RS / Runner / INSERT LINEA 2000
Artikelnummer
836511
Tillverkare
REM - MAHROS - OMAL
Typ
OVER RS / Runner / INSERT LINEA 2000
Dokument
Layout_REM.pdf
Tillverkningsår
2011
Artikel tillgänglig från
at once
Artikeltillstånd
Plats
Tyskland, 04895 Falkenberg
Demonterings- och lastningskostnader (bindande)
5 900,00 €
Transportkostnader
ingår inte
Leveransvillkor
FCA Falkenberg, lastad på lastbil
Betalningsvillkor
100 % betalning före hämtning
Uppställningsmått ca (L x B x H)
okänd:
Vikt ca
1 kg
Complete REM OVER RS 20.13 CNC machining center for drilling, milling and grooving. Incl. MAHROS Runner 12-32/D loading and unloading bridge and OMAL INSERT LINEA 2000 CNC machining center for drilling and dowel insertion station.

The pictures are from 2011 after commissioning.
Original pictures of the current dismantled state (warehouse service provider) will be submitted later.


Pos. 1 MAHROS Runner 12-32/D loading and unloading bridge in portal design
- Suction frame with automatic suction cups
- Motorized roller conveyor
- Dimensions approx. 1000 x 3500 mm
- Load capacity approx. 1000 kg/m
- Unloading conveyor LS-90° (LxW approx. 3200 x 1600 mm)
- Unloading conveyor LS (LxW approx. 5120 x 1600 mm)
- Plate dimensions
   - Length approx. 230 - 3200 mm
   - Width of the single plate approx. 220 - 1220 mm
   - Width of the plates in double row approx. 220 - 600 mm
   - Thickness approx. 10 - 60 mm
   - Weight max. 100 kg
- Stack dimensions
   - Height from floor max. approx. 1850 mm
   - Maximum usable height (including sacrificial plate) approx. 1600 mm

Pos. 2 REM OVER RS 20.13 CNC machining center for drilling, milling and grooving
The function of the machining center REM takes place with the plate in the vertical position within the Machine in longitudinal throughput. The lower edge of the panel is guided on the machine's transport chain.

A vertical clamping device that can be moved according to the panel height guarantees a constant Support point of the workpiece with the transport, so the workpiece is during the whole processing guided and controlled in its respective position.

The horizontal clamping device, on the other hand, is used to guide the panel in relation to the panel thickness. In this way, the panel is continuously guided, both in terms of width and thickness, throughout the entire processing cycle.

REM processing units
- Machining spindle 5.5 KW (automatic speed max. 18,000 rpm) and 10-fold tool changer as a turret system

REM machining units drilling with a total of 34 positions, axis Y2
- Motor 4 KW
- 14 drill spindles grid 32 mm in X-direction
- 14 drill spindles grid 32 mm in X-direction
- 6 drilling spindles in a 50 mm grid in the X direction

REM machining units drilling with a total of 14 positions, axis Y22
- Motor 4 KW
- 11 drilling spindles grid 32 mm in Y-direction
- 7 drilling spindles grid 32 mm in X-direction
- Milling unit 5.5 KW with collet

Depositing station 0-90° degrees with transfer device with a length of approx. 3200 mm

Pos. 3 OMAL INSERT LINEA 2000 CNC machining center for drilling and dowel insertion station
Workpiece Dimensions
- Length approx. 250 - 3200 mm
- Width approx. 120 - 860 mm
- Thickness approx. 12 - 60 mm

W axis: stroke approx. 3200 mm, speed approx. 20 m/min
X1/2 axis: stroke approx. 800 mm, speed approx. 90 m/min
Z1/2 axis: stroke approx. 40 mm, speed approx. 15 m/min
W2 axis: (positioning of the central beam) stroke approx. 3000 mm, speed approx. 20 m/min
Transport speed approx. 46 - 57.5 - 69 m/min

Horizontal Drilling Unit
The machine is equipped with two electrospindles mounted respectively on the right and left beam.

Dowel Units
The machine is equipped with two dowel units mounted on the right and left beam.
Each unit is complete with vibratory conveyor, dowel glue supply system and dowel dimensions 8x30 mm Visa översättning
Automatisk översättning
Direktförsäljning
Har du några frågor om artikeln? Kontakta oss.
10 följare
Borrmaskin med genommatning REM - MAHROS - OMAL OVER RS / Runner / INSERT LINEA 2000
10
Följare
På begäran
Pris
Har du några frågor om artikeln? Kontakta oss.
Våra tjänster
  • Demonterings- och återmonteringsservice
  • Globalt logistiknätverk
  • Individuell rådgivning
  • Stöd med dokument och tullhantering