Açık artırma Machines and Inventory for Plastics & Metal Processing

GILDEMEISTER GLD 25 CNC sliding headstock lathe

GILDEMEISTER GLD 25 CNC sliding headstock lathe
En İyi Parça
ürün no. 114
Açık artırma sona erdi.
Açık artırma bitti
Mevcut benzer ürünleri keşfet.
İsim
GILDEMEISTER GLD 25 CNC sliding headstock lathe
Ürün numarası
926813
Üretici
GILDEMEISTER
Model / Tip
GLD 25
İmalat yılı
2003
Ürün şu zamandan itibaren uygun
immediately
Ürün durumu
Yer
Almanya, 73235 Weilheim Teck
Demontaj ve Yükleme Ücreti (bağlayıcı)
300.00 €
Nakliye masrafları
hariç
Teslimat şartları
FCA Weilheim Teck, kamyona yüklendi
Ödeme şekli
tahsilattan öncesi %100 ödeme
Yaklaşık ağırlık yakl.
2,500 kg
Yaklaşık montaj boyutları (UxGxY)
7,000 x 1,300 x 1,700 mm
Machine number: 5401-0583
Operating voltage: 400 V
Frequency: 50 Hz
Rated current: 35 A
Connection: 19 kVA
Control unit: GE FANUC SERIES 18i-T
Operating hours read off:
Control unit 1: 24901
Automatic time: 18778
Feed time: 8512
Max. rotatable diameter: 25 mm
Diameter of front bearing: 45 mm
Spindle position with disk brake: 0.5°
Max. Speed: 8000 rpm
Bar passage: 25 mm
Longitudinal stroke: 160 mm
Diameter of recirculating ball screw: 20 mm
Pitch of recirculating ball screw: 5 mm
Recirculating ball bearing guides: 25 mm
Feed rate: 15 m/min
Max. thrust force axis: 125 daN
Radial stroke X1: 30 mm
Transverse stroke Y1: 220 mm
Rapid traverse feed X1: 10 m/min
Rapid traverse feed Y1: 10 m/min
Recirculating ball bearing guides X1: 15 mm
Recirculating ball bearing guides Y1: 15 mm
Diameter of recirculating ball screw X1: 20 mm
Diameter of recirculating ball screw Y1: 20 mm
Pitch of recirculating ball screw X1: 5 mm
Pitch of recirculating ball screw Y1: 5 mm
Max. thrust force axis X1: 190 daN
Max. thrust force axis Y1: 190 daN
Max. number of fixed tools: 9
Max. number of fixed and driven tools: 5 + 3
Tool shank dimensions: 12 x 12 mm
Max. Rotating tool speed: 6000 rpm
The machine has a counter spindle
Diameter of front bearing: 45 mm
Longitudinal stroke C1: 265 mm
Rapid traverse speed C1: 15 m/min
Max. Thrust force axis C1: 250 daN
The machine is equipped with an additional chip tray incl. chip conveyor and a bar loader from the manufacturer FMB
Type: TURBO 3-26
Attention: the cutting tools shown in the photos are not included in the scope of delivery
Attention: the conveyor belt shown in the photos is not included in the scope of delivery Çeviriyi göster
Otomatik çeviri
Açık artırma ismi
Machines and Inventory for Plastics & Metal Processing
ürün no.
114
Belgeler
Özel Açık Artırma Koşulları
İnceleme
Talep üzerine tam konum paylaşılacaktır.
73235 Weilheim Teck / 73529 Schwäbisch Gmünd, Germany

- address on request -
Viewing by prior appointment only!
Alış
Pazartesi, 22.07.2024 kadar
Cuma, 26.07.2024, from 08.00 kadar 16.00

Pazartesi, 29.07.2024 kadar
Cuma, 02.08.2024, from 08.00 kadar 16.00


Hizmetlerimiz
  • 16 dilde kişisel hizmet
  • Yerinde ve uzmanlardan danışma
  • Talep üzerine nakliye organizasyonu
  • Belgeler ve gümrük işlemleri ile destek