Açık artırma Machinery and Accessories (Wood and Plastics Processing, Handling Equipment, Construction Machinery, Agricultural Industry) - Eastern Europe
Kombine Yüzey- ve Kalınlık Planya LOGOSOL DH410 (2) MP200EH7S-V
ürün no. 28
Açık artırma henüz başlamadı
6 izleyici
Bogdan Zaharia
Makine ayrıntıları
- İsim
- Kombine Yüzey- ve Kalınlık Planya LOGOSOL DH410 (2) MP200EH7S-V
- Ürün numarası
- 876723
- Üretici
- LOGOSOL
- Model / Tip
- DH410 (2) MP200EH7S-V
- Belgeler
- 1-21 DH410-Modell.pdf
- İmalat yılı
- 2020
- Ürün şu zamandan itibaren uygun
- immediately
- Ürün durumu
- Yer
-
Romanya, 110024 Pitești, Arges
- Haritada göster
- Bu konumdaki tüm ürünler
Maliyetler ve hizmetler
- 400.00 €
- Nakliye masrafları
- hariç
- Teslimat şartları
- FCA Pitești, Arges, kamyona yüklendi
- Ödeme şekli
- tahsilattan öncesi %100 ödeme
- vergi / depozito
Teknik ayrıntılar
- ana motor
- 3 kW
- Planya yüksekliği
- 100 mm
- Planya yüksekliği
- 410 mm
- Yaklaşık montaj boyutları (UxGxY)
- 1,000 x 840 x 1,230 mm
- Yaklaşık ağırlık yakl.
- 225 kg
- Üreticinin seri numarası
- MP200/S/006/2020
Ürün tanımı
- The machine was only started for tests - maximum of 30 minutes. The test was made without any loads (wood) There for the item is brand new!
- serial number MP200/S/006/2020
- a reliable planer with a width of 410 mm
- Logosol DH410 has a lot in common with our PH260. The machine is built on the same principles and most of its components are the same as PH260’s, which means that it is a very sturdy machine with a cast-iron machine table and separate motors for each cutter and the feeder. Both the machines also have the same type of knives and cutter heads.
- The difference is that DH410 works with two cutters instead of four. Four-sided planing is made by running the board twice through the machine, while you only machine the board once when planing and dimensioning two sides up to a width of 310 mm and a height of 100 mm
- Improvements in the model 2 include:
- 2-sided planing/moulding: width 325 mm, height max 100 mm
- planing (assembly required): width 410 mm, height 260 mm
- top cutter: diameter 72 mm, width 410 mm, output 3 kW, rotational speed 6000 rpm, take-off when planing 0-8 mm , take-off when moulding max. 10 mm
- side cutter: diameter of spindle axel 30 mm, cutter height max. 100 mm, diameter max. 140 mm, output 3 kW, rotational speed 6000 rpm, cutting depth max. 30 mm
- electric system: total output 6.2 kW, All motors are equipped with overheating protection, electrical connection 3-phase, 400 V, 16 A, 16A fuses are sufficient for less demanding production
Otomatik çeviri
Açık artırma ayrıntıları
- Açık artırma ismi
- Machinery and Accessories (Wood and Plastics Processing, Handling Equipment, Construction Machinery, Agricultural Industry) - Eastern Europe
- ürün no.
- 28
- Belgeler
- Özel Açık Artırma Koşulları
- İnceleme
-
Talep üzerine tam konum paylaşılacaktır.
No fixed date. The items are in different locations (see item description). Inspection by appointment only!
Hizmetlerimiz
- 16 dilde kişisel hizmet
- Yerinde ve uzmanlardan danışma
- Talep üzerine nakliye organizasyonu
- Belgeler ve gümrük işlemleri ile destek