Vernikleme Makinesi GIARDINA DUALTECH 420 DB DRY

Vernikleme Makinesi GIARDINA DUALTECH 420 DB DRY
İsim
Vernikleme Makinesi GIARDINA DUALTECH 420 DB DRY
Ürün numarası
662348
Üretici
GIARDINA
Model / Tip
DUALTECH 420 DB DRY
İmalat yılı
2020
Ürün şu zamandan itibaren uygun
immedaitly
Ürün durumu
çalışır durumda
Yer
Almanya, 87647 Kraftisried
Demontaj ve Yükleme Ücreti (bağlayıcı)
1,450.00 €
Nakliye masrafları
hariç
Teslimat şartları
FCA Kraftisried, kamyona yüklendi
Ödeme şekli
tahsilattan öncesi %100 ödeme
çalışma genişliği
1,300 mm
Geçiş yüksekliği
100 mm
ana motor
28,0 kW
Yaklaşık montaj boyutları (UxGxY)
13,500 x 2,400 x 2,400 mm
Yaklaşık ağırlık yakl.
5,000 kg
GIARDINA DUALTECH 420 DB DRY Roller Application Machine
with synthetic-coated, 2,000 mm wide conveyor belt

and a working width of 1,300 mm

Material recovery GREEN BELT


Infeed roller conveyor with a working width of 1,300 mm, length 1,220 mm
 
  •     Roller transport, driven rollers with suction device at the bottom.
  •     Workpiece blow-out, rotating blow-out, time-controlled
  •     Outfeed transport- hinged
  •     Lexan cover, hinged at the discharge, cover of the green belt zone
  •     Powered roller transport, PVC coated rollers.

__________________________________________________________________
The linear slides are dust-sealed and are maintained via a few central lubrication points.
  • Modern software controls the acceleration as well as the deceleration and is adjustable from 0-120 m/min.
  • Central lubrication with programmable intervals via PIN
_____________________________________________________________________Guns
  • On-site: four (4) guns per STÄUBLI beam, are taken over from the existing system. Preparation of the existing exchangeable plates for your guns.
Display HMI with 7" touch screen

- Programme parameters and fixed data
- Production statistics
- Memory of the painting programmes
- Fault diagnosis
- Teleservice adapter prepared via customer PC

Technical features DUALTECH 416 DB DRY

max. working width 1,300 mm
min. workpiece length 350 mm
max. material thickness 100 mm
Adjustable feed speed 2 - 5 m/min
motor power reciprocator (linear axis) 4.0 kW
one (1) frequency-controlled servo motor 0 - 120 m/min
Adjustable oscillation speed of the linear axes
(reciprocator) / two (2) linear axes

Dimensions of supply air connection (from AHU fresh air) mm according to layout
Supply air volume spray room 12,000 m³/h
Fan power supply air (supply air/exhaust air AHU) 2 x 1.5 kW
    
Dimensions exhaust air connection (to AHU exhaust air) mm acc. to layout

Exhaust air volume12,000 (-) m³/h
Fan power extract air (supply air/exhaust air AHU) 7.5 kW
    
Motor power inlet transport 0.37 kW
Motor power outlet transport 0.37 kW

Total installed power 28.0 kW



 

  Çeviriyi göster
Otomatik çeviri
Direct Sale
Ürüne ilişkin herhangi bir sorunuz var mı? Lütfen bizimle iletişime geçiniz.
24 izleyici
Vernikleme Makinesi GIARDINA DUALTECH 420 DB DRY
24
İzleyici
İstek üzerine
Fiyat
Ürüne ilişkin herhangi bir sorunuz var mı? Lütfen bizimle iletişime geçiniz.
Hizmetlerimiz
  • Demontaj ve yeniden montaj hizmeti
  • Dünya çapında lojistik ağı
  • Bireysel danışmaconta
  • Belgeler ve gümrük işlemleri ile destek