MAZAK Integrex e-500H II x 3000U Vertikal-Bearbeitungszentrum
Artikeldetails
- Name
- MAZAK Integrex e-500H II x 3000U Vertikal-Bearbeitungszentrum
- Artikelnummer
- 962527
- Hersteller
- MAZAK
- Typ
- Integrex e-500H II x 3000U
- Baujahr
- 2010
- Artikel verfügbar ab
- Sofort
- Artikelzustand
- Standort
-
Belgien, 8510 MARKE
- Auf Karte anzeigen
- Alle Artikel dieses Standorts
Kosten und Leistungen
- 6.000,00 €
- Transportkosten
- nicht enthalten
- Lieferbedingungen
- FCA MARKE, verladen auf LKW
- Zahlungsbedingungen
- 100% Vorauskasse vor Abholung
- Steuer / Kaution
Technische Details
- z -Weg
- 3.122 mm
- Werkstückgewicht max.
- 710 kg
- x-Weg
- 870 mm
- y-Weg
- 500 mm
- Steuerung
- Mazatrol Matrix
- Aufnahme
- BT 50
- Anzahl der Werkzeugplätze
- 40
- Spindelleistung
- 37 kW
- Spindeldrehmoment
- 1.400 Nm
- Drehzahlbereich
- 1.600 1/min
- Vorschubbereich
- 4.500 mm/min
- Eilgang
- 40 m/min
- Gesamtantriebsleistung
- 30 kW
- Gewicht ca.
- 26.000 kg
- Aufstellmaß ca. (LxBxH)
- 8.040 x 4.600 x 3.220 mm
Artikelbeschreibung
- Seriennummer: 221759
- Betriebsstunden am 08-11-2023: 10035 h
- Maximum Swing:
- 1500U: Ø820 mm
- 3000U: Ø820 mm
- Swing Over Cross Slide:
- Ø820 mm (both models)
- Maximum Machining Diameter:
- Ø820 mm (both models)
- Maximum Support Mass (including chuck):
- Chuck work: 710 kg
- Shaft work: 1500 kg (Note 1)
- Rotating Speed: 35 – 3300 min⁻¹
- Turning Spindle Through Hole Diameter: Ø104 mm
- Turning Spindle Nose: JIS A2-11"
- Turning Spindle Bearing Inner Diameter: Ø150 mm
- Turning Spindle Motor (30-min. continuous rating): 30/22 kW (Note 2)
- Maximum Torque: 3379 Nm
- C-Axis Clamp Torque: 2700 Nm
- Smallest Input Capacity for C-Axis Movement (Rotation): 0.0001 degrees
- Max. Speed of C-Axis Rotation: 20 min⁻¹
- Rated Load Torque of C-Axis (for 180°): 1400 Nm
- Sleeve Hole Type: MT No. 5
- Maximum Thrust Power: 15 kN
- Movement Stroke:
- 1500U: 1466 mm (1157.8 mm with NC rest, Note 3)
- 3000U: 2990 mm (2681.8 mm with NC rest, Note 3)
- Rapid Traverse: 4500 mm/min
- Milling Head Type: Single spindle with ATC unit
- Tool Shank Type:
- Outside turning: Ø25 mm
- Inside turning: Ø50 mm
- Max. Tool Size: Ø260 × 500L
- Milling-Spindle Motor Output (30-min. rating): 37 kW
- Maximum Rotary Tool Torque (1-min. rating): 274 Nm
- Milling Spindle Speed: 25 – 10,000 min⁻¹
- B-Axis Clamping Force: 13.85 kN
- Angular Positions of Clamping the B-Axis Coupling: At 15° intervals (49 positions: -30° to +210°)
- Smallest Input Capacity for B-Axis Indexing: 0.001 degrees
- B-Axis Operation Range: -30° to +210°
- B-Axis 90° Indexing Time: 4 seconds
- Rated Continuous Torque of B-Axis (for 180°, 30%ED): 2795 Nm
- Continuously Rated Torque of B-Axis: 1322 Nm
- Rapid Traverse:
- X-Axis: 40,000 mm/min
- Y-Axis: 40,000 mm/min
- Z-Axis: 40,000 mm/min
- V-Axis (Optional): 8,000 mm/min
- Thrust (Continuous/150%):
- X-Axis (downward): 36,314 N / 48,659 N
- Y-Axis: 23,174 N / 34,761 N
- Z-Axis: 28,348 N / 42,520 N
- V-Axis (optional): 6,221 N / 9,326 N
- Movement Stroke:
- X-Axis: 1598 mm
- Y-Axis: 3122 mm
- Z-Axis: 939 mm
- V-Axis (optional): 2463 mm
- Coolant Tank Capacity:
- 1500U: 620 L
- 3000U: 800 L
- Power Requirement (Continuous Rating): 92 kVA
- Air Pressure: 0.5 MPa
- Air Requirement: 210 L/min (Note 4)
- Height of Centers: 1300 mm
- Length:
- 1500U: 6540 mm
- 3000U: 8040 mm
- Width: 5300 mm
- Height: 3220 mm
- Machine Mass:
- 1500U: 22,600 kg
- 3000U: 28,600 kg
- Noise Level (LwA):
- 1500U: 75.5 dBA
- 3000U: 75.5 dBA
- Uncertainty Level (K): ±4 dBA
- Measuring Conditions:
- Spindle speed: 2400 min⁻¹ (during workpiece gripping by chuck)
- Feed axis driven
- Turret to be indexed
- Chip conveyor ON
- Tailstock not used
- Measuring Position:
- Operator position, 1.6 m above floor level
- Standards: EN-12415, EN-12417, ISO230-5
Automatische Übersetzung
Direct Sale
6 Beobachter
6
Beobachter
Auf Anfrage
Preis
Unsere Services
- Demontage & Remontage Service
- Weltweites Logistik-Netzwerk
- Individuelle Beratung
- Unterstützung bei Papieren & Zollabwicklung