1 / 11
ARBURG - Allrounder 370 C 1000-250 - 1994 - Injection moulding machine
- Current bid
- Status
€
Total bid amount
See total breakdown
Total bid amount
See total breakdown
€
Max bid amount
See total breakdown
Max bid amount
See total breakdown
Lot specifications
- Quantity
- 1
- Margin
- No
- Brand
- ARBURG
- Type
- Allrounder 370 C 1000-250
- Year of build
- 1994
- Closing force
- 1000kN
- Mould opening stroke
- 500mm
- Ejector stroke
- 175mm
- Ejector force
- 40kN
- Mould size h
- 250mm
- Machine weight
- 3600kg
- Total dimension L
- 4300mm
- Total dimension W
- 1600mm
- Total dimension Height
- 2000mm
- Terms of delivery
- Loaded on truck
Description
Clamping unit:
Clamping force maximum 1,000 KN
Tool securing force / dto. increases maximum 50 / 500 KN
Opening force / dto. increases maximum 35 / 250 KN
Opening travel maximum 500 mm
Tool height minimum 250 mm
Maximum clamping plate spacing 750 mm
clear column spacing 370 x 370 mm
Tool mounting plates ( width x height ) 545 x 545
Tool diameter maximum 540 mm
Maximum weight of the movable half of the tool 600 kg
Ejector force maximum 40 KN
Ejector travel maximum 175 mm
Injection unit:
Screw diameter 35 / 40 / 45 mm
Screw length L/D 23 / 20 / 18
Screw path maximum 145 mm
Maximum displacement 139 / 182 / 230 cubic centimeters
Moulded part weight grams / hp at fill factor 0.8: is 117 / 153 / 194
Maximum spray pressure in bar 2,500 / 2,000 / 1,600
Maximum injection flow in grams per second: approx. 105 /140 / 175
Dynamic pressure maximum 350 bar
Maximum screw circumferential speed in meters per minute 37 / 42 / 47
Worm torque maximum 580 / 640 / 720 Nm
Maximum nozzle application force 40 KN
Maximum nozzle lift-off distance 300 mm
Cylinder heating 4 x 2,000 watts, 4 heating zones
Nozzle heating 600 watts, one heating zone
Granulate container capacity 50 litres
variable injection position maximum 170 mm
Remarks
Unaudited
Additional details
All items are sold as used and uninspected unless otherwise noted.
Viewing appointments are possible on 28.01.2026 from 09:00 to 15:00. Please note that a viewing is only possible by appointment at anabela.decastro@surplex.com.
Pick-up possible in the following period:
09.02.2026 – 13.02.2026 and 16.02.2026 – 20.02.2026 from 09:00 to 12:00 and from 13:00 to 16:30
Please note: Pick-up is not possible on public holidays and weekends.
Please refer to the item description.
For more detailed information on guarantee and warranty, please refer to the auction conditions.
!!! Attention: "The invoice must be created within 24 hours after the end of the auction; if this is not done, we reserve the right to cancel or credit the invoice."
Contact for technical questions:
Andreas Flütter
Project Manager Germany
Gsm: +49
E-mail: andreas.fluetter@surplex.com
