1 / 21
5-axis machining center Deckel Maho DMC 70 evo
- Current bid
- Status
€
Total bid amount
See total breakdown
Total bid amount
See total breakdown
€
Max bid amount
See total breakdown
Max bid amount
See total breakdown
Lot specifications
- Quantity
- 1
- Margin
- No
- Brand
- Deckel Maho
- Type
- DMC 70 eVo
- Year of build
- 2007
- Total dimension W
- 4010mm
- Total dimension L
- 3450mm
- Machine weight
- 11200kg
- Terms of delivery
- Loaded on truck
Description
Control: Heidenhain Mill Plus
Spindle replacement in 2022! Machine width without pallet changer approx. 2550 mm
Main drive
AC Servo Motor Motor Spindle
Speed infinitely programmable 20–18,000 rpm
Setup speed 20–800 min-1
Motor power and torque according to performance diagram
Feed drive
AC servo motors for X/Y/Z
axes Infinitely variable feed up to 20,000 mm/min
Rapid traverse X/Y/Z 50 m/min
Setup operation 20–2,000 mm/min
Input unit 0.01 mm
Displacement measuring system
Resolution X/Y/Z 0.001 mm
Position tolerance 0.010 mm
Workspace Travel X 750 mm
Travel Y 600 mm
Travel Z 520 mm
Working spindle
Tool holder SK 40 DIN 69871 A
Tool clamping hydraulic-mechanical
Tool Changer
Magazine seats 92
Max. tool length 315 mm
Max. tool weight 6 kg
Total weight magazine 270 kg
Work table
NC rotary table with swivel axis
Clamping surface 500 × 500 mm
Swivel range 180°
Max. load 250 kg
Workpiece Ø max. 628 mm, height 500 mm
Pallet Changer
2 pallets with perforated grid
Rotational movement 180°
Permissible load up to 500 kg
Mains connection 3N PE 400/230 V 50/60 Hz
Rated current 82 A, power consumption 57 kVA
Max. pre-fuse 100 A
Pneumatics
Compressed air 5.5–8 bar, filter 50 μm
Air requirement 50 m³/h + 25 m³/h blowing air
Further technical data in the attached pdf
Spindle replacement in 2022! Machine width without pallet changer approx. 2550 mm
Main drive
AC Servo Motor Motor Spindle
Speed infinitely programmable 20–18,000 rpm
Setup speed 20–800 min-1
Motor power and torque according to performance diagram
Feed drive
AC servo motors for X/Y/Z
axes Infinitely variable feed up to 20,000 mm/min
Rapid traverse X/Y/Z 50 m/min
Setup operation 20–2,000 mm/min
Input unit 0.01 mm
Displacement measuring system
Resolution X/Y/Z 0.001 mm
Position tolerance 0.010 mm
Workspace Travel X 750 mm
Travel Y 600 mm
Travel Z 520 mm
Working spindle
Tool holder SK 40 DIN 69871 A
Tool clamping hydraulic-mechanical
Tool Changer
Magazine seats 92
Max. tool length 315 mm
Max. tool weight 6 kg
Total weight magazine 270 kg
Work table
NC rotary table with swivel axis
Clamping surface 500 × 500 mm
Swivel range 180°
Max. load 250 kg
Workpiece Ø max. 628 mm, height 500 mm
Pallet Changer
2 pallets with perforated grid
Rotational movement 180°
Permissible load up to 500 kg
Mains connection 3N PE 400/230 V 50/60 Hz
Rated current 82 A, power consumption 57 kVA
Max. pre-fuse 100 A
Pneumatics
Compressed air 5.5–8 bar, filter 50 μm
Air requirement 50 m³/h + 25 m³/h blowing air
Further technical data in the attached pdf
Remarks
Item condition: used and unchecked
Additional details
All items are sold as used and uninspected unless otherwise noted.
A viewing is only possible after prior registration at soha.douiri@surplex.com possible.
Pick-up possible during the following period : 23/02/2026 to 25/02/2026 .
Please note: Pick-up is not possible on public holidays and weekends.
Please refer to the item description.
For more detailed information on guarantee and warranty, please refer to the auction conditions.
A viewing is only possible after prior registration at soha.douiri@surplex.com possible.
Pick-up possible during the following period : 23/02/2026 to 25/02/2026 .
Please note: Pick-up is not possible on public holidays and weekends.
Please refer to the item description.
For more detailed information on guarantee and warranty, please refer to the auction conditions.
Documents
37,949 kg
CO₂e
This is the amount of CO₂ emissions you could save by purchasing this item pre-owned instead of new.For comparison, an Berlin - Lisbon flight corresponds to 169 kg CO₂e per passenger.
