1 / 9
CMS 2331 SEL - Horizontal CNC Machining Center
- Current bid
- Status
Lot specifications
- Quantity
- 1
- Margin
- No
- Brand
- CMS
- Type
- 2331 SEL
- Electric connection
- 400V
- Machine weight
- 16000kg
- Total dimension L
- 12000mm
- Total dimension W
- 5000mm
- Total dimension Height
- 3500mm
- Terms of delivery
- Ex foundation-unpackaged
Description
CMS – Costruzioni Macchine Speciali (Zogno, Italy)
Schematic: CMS 2331 SEL | Serial Number: 2331
It is a large-format CNC gantry machining centre from CMS, typically from the Ares / Cronus / MX / Athena series, used for:
• Solid surface materials (Corian, Varicor, Solid Surface)
• Wooden panels
• Gypsum and fibre cement
•Plastic sheets
• Light metal processing (with suitable equipment)
The design, gantry construction, extraction technology and table size correspond to a 5-axis or 3+2-axis gantry CNC machining center.
Technical description of the system
Machine structure
• Heavy gantry
• Long vacuum table with grid plate
• Underfloor pipes for pneumatics and vacuum
• Extraction hood above the spindle
• Automatic tool holder (recognizable by the turret magazine on the side)
• Closed protective compartment at the front (red housing)
Control
• Older CMS / AK control
• Control panel with soft keys and numeric keypad
• Machine hour indicator and hydraulic/vacuum switch on the control cabinet
• Separate start/stop and emergency stop control panels
Specifications
• Nominal voltage: 400 V
• Frequency: 50 Hz
• Phases: 3
• Rated current (full load): 35 A
• Circuit breaker: 24 kA breaking capacity
This corresponds to a main connected load of approx. 20–25 kW, depending on the spindle.
Schematic: CMS 2331 SEL | Serial Number: 2331
It is a large-format CNC gantry machining centre from CMS, typically from the Ares / Cronus / MX / Athena series, used for:
• Solid surface materials (Corian, Varicor, Solid Surface)
• Wooden panels
• Gypsum and fibre cement
•Plastic sheets
• Light metal processing (with suitable equipment)
The design, gantry construction, extraction technology and table size correspond to a 5-axis or 3+2-axis gantry CNC machining center.
Technical description of the system
Machine structure
• Heavy gantry
• Long vacuum table with grid plate
• Underfloor pipes for pneumatics and vacuum
• Extraction hood above the spindle
• Automatic tool holder (recognizable by the turret magazine on the side)
• Closed protective compartment at the front (red housing)
Control
• Older CMS / AK control
• Control panel with soft keys and numeric keypad
• Machine hour indicator and hydraulic/vacuum switch on the control cabinet
• Separate start/stop and emergency stop control panels
Specifications
• Nominal voltage: 400 V
• Frequency: 50 Hz
• Phases: 3
• Rated current (full load): 35 A
• Circuit breaker: 24 kA breaking capacity
This corresponds to a main connected load of approx. 20–25 kW, depending on the spindle.
