1 / 10
Energy meter with Modbus connection SOLAREDGE SE-MTR-3Y-400V-A (REF: 4002946)
- Current bid
- Status
€
Total bid amount
See total breakdown
Total bid amount
See total breakdown
€
Max bid amount
See total breakdown
Max bid amount
See total breakdown
Lot specifications
- Quantity
- 1
- Margin
- No
- Brand
- SOLAREDGE
- Model
- SE-MTR-3Y-400V-A
- Terms of delivery
- Loaded on truck
Description
Model: SE-MTR-3Y-400V-A
ELECTRICAL SERVICE
Operating voltage range (line-neutral / line-to-line): rated 230 / 400 Vac, 184–264.5 / 320–460 Vac
AC Frequency: 45/65Hz
Supported networks: single-phase and three-phase, L/N/PE; L1 / L2 / L3 / N / PE
Maximum Power Consumption: 3W
CT Inputs: 333 mV
COMMUNICATION
Supported Communication Interfaces: RS485 half-duplex, 3-wire (A, B, GND)
Response time: ≤ 200 ms
Default Device ID (Modbus): 2
RS485 line termination resistance: 120 Ω
ACCURACY (at 25 °C, power factor = 1)
Accuracy 1% – 100% of CT current rating: ±1.0 %
IEC accuracy class: IEC 62053-21 Class 1, IEC 62053-23 Class 2
STANDARDS
COMPLIANCE Safety: IEC 61010-1, UL 61010-1, CAN/CSA-C22.2 No. 61010-1-04
Immunity: EN 61326-2-1, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6
Emissions: EN 55022 Class B
INSTALLATION
SPECIFICATIONS Dimensions (H× W × D): 75 × 138.6 × 35 mm / 2.95 × 5.45 × 1.37 in
Weight: 225 g / 0.49 lb
Operating temperature range: −40°C ~ +85°C / −40°F ~ +185°F
Relative humidity (non-condensing): 5 % ~ 90 % up to 40 °C, decreasing linearly up to 50 % RH at 55 °C
Degree of protection: IP20, indoor
use only Mounting Type: DIN Rail / Screw
Mounting Single piece load dimensions: 170 x 120 x 55 mm
ELECTRICAL SERVICE
Operating voltage range (line-neutral / line-to-line): rated 230 / 400 Vac, 184–264.5 / 320–460 Vac
AC Frequency: 45/65Hz
Supported networks: single-phase and three-phase, L/N/PE; L1 / L2 / L3 / N / PE
Maximum Power Consumption: 3W
CT Inputs: 333 mV
COMMUNICATION
Supported Communication Interfaces: RS485 half-duplex, 3-wire (A, B, GND)
Response time: ≤ 200 ms
Default Device ID (Modbus): 2
RS485 line termination resistance: 120 Ω
ACCURACY (at 25 °C, power factor = 1)
Accuracy 1% – 100% of CT current rating: ±1.0 %
IEC accuracy class: IEC 62053-21 Class 1, IEC 62053-23 Class 2
STANDARDS
COMPLIANCE Safety: IEC 61010-1, UL 61010-1, CAN/CSA-C22.2 No. 61010-1-04
Immunity: EN 61326-2-1, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6
Emissions: EN 55022 Class B
INSTALLATION
SPECIFICATIONS Dimensions (H× W × D): 75 × 138.6 × 35 mm / 2.95 × 5.45 × 1.37 in
Weight: 225 g / 0.49 lb
Operating temperature range: −40°C ~ +85°C / −40°F ~ +185°F
Relative humidity (non-condensing): 5 % ~ 90 % up to 40 °C, decreasing linearly up to 50 % RH at 55 °C
Degree of protection: IP20, indoor
use only Mounting Type: DIN Rail / Screw
Mounting Single piece load dimensions: 170 x 120 x 55 mm
Additional details
Items sold in unverified status.
