1 / 77
Danobat - 2012 - T3CH126+CPI105DI - Drilling and Sawing Street
- Current bid
- Status
€
Total bid amount
See total breakdown
Total bid amount
See total breakdown
€
Max bid amount
See total breakdown
Max bid amount
See total breakdown
Lot specifications
- Quantity
- 1
- Margin
- No
- Brand
- Danobat
- Type
- T3CH126+CPI105DI
- Year of build
- 2012
- Serial number
- 1011901398
- Number of drills
- 3
- Drilling capacity
- 6-40mm
- Number of speeds
- 0-2100
- Speed from n=
- 0rpm
- Speed till n=
- 2500rpm
- Stepless speedcontrol
- Yes
- Machine weight
- 13950kg
- Dimension l
- 5039mm
- Dimension w
- 1960mm
- Dimension h
- 3476mm
Description
Infeed table 24000 mm.
Discharge table 18000 mm.
Multispindle drilling rig T3CH-126:
Maximum material size 1200 x 600 mm.
Minimum Material Dimension 80 x 6 mm.
Drilling, tapping, sovereigning, centering and marking.
Servo controlled motor speed and feed speeds.
3 changers for 6 tools for 3-sided machining.
Automatic calibration system by means of laser measurement, after tool change.
Clamping pressure control horizontal clamping max. 1 x 2.5 tons.
Clamping pressure control vertical clamping max. 4 x 1.5 tons.
Double column mitre band saw machine CPI-105DI:
Capacity 90 degrees 1000 x 500 mm. or around 520 mm.
45 degrees 660 x 500 mm.
30 degrees 450 x 500 mm.
frequency controlled variable belt speed 20-157 m/min.
Hydraulic feeding and clamping.
driven chip brush.
Horizontal and Vertical clamping.
Trailing saw band guide arm with the clamp.
Bandsaw size 7545 x 54 x 1.6 mm.
Automatic hydraulic tire tensioning device.
Marking system Danomarking UM03 on T3CH-126:
Powered marking system by means of marking tools.
Danomarking installed for 4-sided machining for marking and scribing.
Vertical Danomarking system placed on the Vertical drilling unit.
2 Horizontal Danomarking systems on the Horizontal drilling units.
Lower Danoma ring with control mounted underside.
Operating System:
DANOCONTROL expanded.
PC control with FAGOR axis control.
Interface with DSTV protocol data entry capability.
Real-time edits can be followed on graphic screen.
standard link with Lantek 3D Flex software.
Discharge table 18000 mm.
Multispindle drilling rig T3CH-126:
Maximum material size 1200 x 600 mm.
Minimum Material Dimension 80 x 6 mm.
Drilling, tapping, sovereigning, centering and marking.
Servo controlled motor speed and feed speeds.
3 changers for 6 tools for 3-sided machining.
Automatic calibration system by means of laser measurement, after tool change.
Clamping pressure control horizontal clamping max. 1 x 2.5 tons.
Clamping pressure control vertical clamping max. 4 x 1.5 tons.
Double column mitre band saw machine CPI-105DI:
Capacity 90 degrees 1000 x 500 mm. or around 520 mm.
45 degrees 660 x 500 mm.
30 degrees 450 x 500 mm.
frequency controlled variable belt speed 20-157 m/min.
Hydraulic feeding and clamping.
driven chip brush.
Horizontal and Vertical clamping.
Trailing saw band guide arm with the clamp.
Bandsaw size 7545 x 54 x 1.6 mm.
Automatic hydraulic tire tensioning device.
Marking system Danomarking UM03 on T3CH-126:
Powered marking system by means of marking tools.
Danomarking installed for 4-sided machining for marking and scribing.
Vertical Danomarking system placed on the Vertical drilling unit.
2 Horizontal Danomarking systems on the Horizontal drilling units.
Lower Danoma ring with control mounted underside.
Operating System:
DANOCONTROL expanded.
PC control with FAGOR axis control.
Interface with DSTV protocol data entry capability.
Real-time edits can be followed on graphic screen.
standard link with Lantek 3D Flex software.
Additional details
The collection of the purchased goods is done as follows:
After receiving your payment, the seller will contact you to make a pick-up appointment. You will then receive the exact address.
The city and province where the plots are located is indicated with the plot.
The minimum age for visiting the collection days is 18 years. Visitors must be able to identify themselves.
There is no right of withdrawal. See the Auction Terms and Conditions for more information.
No viewing day will be organized for this auction.
For each lot, an administration fee of € 100 will be charged.
Video
See the details and take a closer look at the item in this video.
