1 / 55
Haltec Basic Temporary Industrial Hall
- Current bid
- Status
€
Total bid amount
See total breakdown
Total bid amount
See total breakdown
€
Max bid amount
See total breakdown
Max bid amount
See total breakdown
Lot specifications
- Quantity
- 1
- Margin
- No
- Brand
- Haltec
- Material
- Aluminium
- Type
- Basic
- Total surface
- 437m²
- Ridge height
- 6500mm
- Gutter height
- 4000mm
- Total dimension L
- 25000mm
- Total dimension W
- 17500mm
- Total dimension Height
- 6500mm
Description
Haltec Basic temporary / demountable industrial hall.
Dimensions:
25 meters length
17.5 meters width
6.5 meters ridge height
4 meters gutter height
Sliding door width: 4.5 meters
Sliding door height: 4 metres
Construction:
Modular system
Aluminium uprights with adjustment option
Foundation-free ground anchoring by means of ground spike
Aluminium roof trusses
Trapezoidal sheet material for walls of 2.40m x 1m per panel
PVC roof tarpaulin with drawstrings + inner tarpaulin (condensation protection class 3) (2.5m width)
Trapezoidal double sliding gate
Tensioners for roof and wall construction
Snow load (roof) 0.20 KN/m2
Wind pressure (thrust) 0.60 KN/m2
Consisting of:
10 modular upright, wall and roof construction at 2.5m depth, 4m gutter height and 6.5m ridge height
2 separate entrance doors
Double sliding gate (4.5m clearance width and 4m headroom)
15 pieces of LED lighting on roof construction (220V)
Rain gutters on both long sides with drainage
Can be used with various types of surfaces (paving, asphalt, etc.)
The length of the hall can be shortened by 2.5 meters due to the modular construction of both wall and roof cladding. The roof consists of a 2.5 meter wide roof tarpaulin + inner tarpaulin which has the same width as the trapezoidal wall panels.
Dimensions:
25 meters length
17.5 meters width
6.5 meters ridge height
4 meters gutter height
Sliding door width: 4.5 meters
Sliding door height: 4 metres
Construction:
Modular system
Aluminium uprights with adjustment option
Foundation-free ground anchoring by means of ground spike
Aluminium roof trusses
Trapezoidal sheet material for walls of 2.40m x 1m per panel
PVC roof tarpaulin with drawstrings + inner tarpaulin (condensation protection class 3) (2.5m width)
Trapezoidal double sliding gate
Tensioners for roof and wall construction
Snow load (roof) 0.20 KN/m2
Wind pressure (thrust) 0.60 KN/m2
Consisting of:
10 modular upright, wall and roof construction at 2.5m depth, 4m gutter height and 6.5m ridge height
2 separate entrance doors
Double sliding gate (4.5m clearance width and 4m headroom)
15 pieces of LED lighting on roof construction (220V)
Rain gutters on both long sides with drainage
Can be used with various types of surfaces (paving, asphalt, etc.)
The length of the hall can be shortened by 2.5 meters due to the modular construction of both wall and roof cladding. The roof consists of a 2.5 meter wide roof tarpaulin + inner tarpaulin which has the same width as the trapezoidal wall panels.
Remarks
!! PLEASE NOTE: THE TEMPORARY INDUSTRIAL HALL MUST BE DISMANTLED AND DISPOSED OF BY THE BUYER BEFORE 15 MARCH. SITE AND SHED ARE ACCESSIBLE FOR COMPANY CAR / TRUCK WITH TRAILER !!
Additional details
The collection of the purchased goods is done as follows:
After receiving your payment, the seller will contact you to make a pick-up appointment. You will then receive the exact address.
The city and province where the plots are located is indicated with the plot.
The minimum age for visiting the collection days is 18 years. Visitors must be able to identify themselves.
There is no right of withdrawal. See the Auction Terms and Conditions for more information.
No viewing day will be organized for this auction.
For each lot, an administration fee of € 100 will be charged.
Video
See the details and take a closer look at the item in this video.
