1 / 10
Häner flail mower HSM1200-P without pick-up
- Current bid
- Status
€
Total bid amount
See total breakdown
Total bid amount
See total breakdown
€
Max bid amount
See total breakdown
Max bid amount
See total breakdown
Lot specifications
- Quantity
- 1
- Margin
- No
- Brand
- Häner
- Type
- HSM1200-P
- Year of build
- 2026
- Own weight
- 336kg
Description
Flail mower HSM1200-P
New device
Excavator class: 3-10 ton
Color: Black
Oil flow: 50-70 l/min
Operating pressure: 170-200 bar max.
Hose size: 1/2 inch male thread
Weight: 336kg
Length: 1370 mm
Width: 765 mm
Height: 725 mm
Working width: 1200 mm
Material thickness base body: 6 mm
Mat.thickness side panels: 8 mm
Number of legs: 18
Flail width/weight: 90/820 mm/g
max. Ø Mulch material: 30-50 mm
Min. cutting height: 35mm
Drive: Hydraulic/V-belt
V-belt: 3AV17x1143Li
Track roller
Crane hooks
Engine cover
ATTENTION:
- Do not taper
hydraulic lines - Do not install
angles on, before or after the cables - The return line must be
set to 100% pressureless / hammer hydraulics - Use only flat-sealing couplings, min. size 4
Scope of delivery:
Operating instructions
Spare parts list
CE Declaration
of Conformity Conversion kit to replace a separate leakage oil line
Hoses with hose protection 3/8 inch, 1,500mm and check valve
New device
Excavator class: 3-10 ton
Color: Black
Oil flow: 50-70 l/min
Operating pressure: 170-200 bar max.
Hose size: 1/2 inch male thread
Weight: 336kg
Length: 1370 mm
Width: 765 mm
Height: 725 mm
Working width: 1200 mm
Material thickness base body: 6 mm
Mat.thickness side panels: 8 mm
Number of legs: 18
Flail width/weight: 90/820 mm/g
max. Ø Mulch material: 30-50 mm
Min. cutting height: 35mm
Drive: Hydraulic/V-belt
V-belt: 3AV17x1143Li
Track roller
Crane hooks
Engine cover
ATTENTION:
- Do not taper
hydraulic lines - Do not install
angles on, before or after the cables - The return line must be
set to 100% pressureless / hammer hydraulics - Use only flat-sealing couplings, min. size 4
Scope of delivery:
Operating instructions
Spare parts list
CE Declaration
of Conformity Conversion kit to replace a separate leakage oil line
Hoses with hose protection 3/8 inch, 1,500mm and check valve
Additional details
ATTENTION: Payment must be made at least three days before the pick-up date, otherwise there is no commitment to the agreed pick-up date.
LOADING: The loading of the auctioned goods is only possible in suitable vehicles or trailers; Cars cannot be loaded. Heavy and large equipment must not be loaded into vans, as axle loads and load securing must be observed. All equipment is provided on suitable pallets and can be loaded by forklift, provided that a suitable transport vehicle is available.
LOADING ASSISTANCE: 3000 kg forklift and 5000 kg crane available.
VAT DEPOSIT: Business buyers from the European Union (EU) and non-EU countries (third countries) are obliged to pay a deposit to Troostwijk Germany on their total purchase. This deposit is calculated on the basis of the VAT rate applicable in the Federal Republic of Germany. After confirmation that the purchased lot has left the EU, the deposit will be returned to the buyer:
• EU buyers must complete a completed confirmation of success [download the template "Template_Intra-Community Supply (DE-EN)" attached here] to Troostwijk Germany and return the deposit to export.de@troostwijkauctions.com in order to receive a refund.
• Non-EU buyers must return a copy of the electronic export declaration (EX-A with MRN - for verification only) or, if the value of the goods is lower, a completed export declaration with a stamp from the EU border customs office to export.de@troostwijkauctions.com in order to get the deposit refunded.
