1 / 4
JAVAC - PRO 3 - Welding Turntable
- Current bid
- Status
Lot specifications
- Quantity
- 1
- Margin
- No
- Brand
- JAVAC
- Type
- PRO 3
- Machine weight
- 62kg
- Terms of delivery
- Loaded on truck
Description
JAVAC Pro 3 PN Welding Positioner
Description:
– The table can be tilted and clamped at an angle of 0° to 90°.
– Start/stop via location-independent foot switch.
– Direction of rotation selectable right/left.
– Turning time adjustable.
– The rotary table has a 60 mm hollow shaft.
– The turntable has a diameter of 340 mm. The surface is chrome-plated to protect against welding spatter.
– The table speed is adjustable from 0.6 − 6 rpm.
– The welding machine can be controlled via the turntable control.
– The ground contact transmits 300 A /100 %.
– The turntable and the controller are separated.
– RF protected.
Technical data:
Model PRO 3 PN
Mains voltage 230 V, 50Hz
Rotary Motor 90V DC65W
Mass connection 300A/100%
Tilt range 0° to 90°
Turntable diameter 340 mm
max. workpiece diameter approx. 510 mm
Speed 0.6 – 6 rpm
Torque 11.8 Nm
Directions of rotation clockwise/counterclockwise
Max. Load Horizontal 290 kg
Mounting bolt circle Ø 114 mm to max. 302 mm
Hollow shaft 60 mm
Slot width turntable 14 mm
Dimensions ( L x W x H ) 380 x 340 x 425 mm
Weight 62 kg
Article number 02.30.01.10132
incl. 4 jaw chuck (external clamping)
Source: https://javac.org/pro-3-pn/
Total weight approx. 80kg
Remarks
Condition: unchecked
Additional details
- Goods are packed and loaded onto trucks
- Shipping possible on request - auctions@modico.com
- No warranty is guaranteed on the items offered
Business buyers from the European Union (EU) and non-EU countries (third countries) are obliged to pay a deposit to Troostwijk Deutschland on their total purchase. This deposit is calculated on the basis of the VAT rate applicable in the Federal Republic of Germany. After confirmation that the purchased lot has left the EU, the deposit will be returned to the buyer:
• EU buyers must complete a completed confirmation of success [download the template "Template_Intra-Community Supply (DE-EN)" attached here] to Troostwijk Germany and return the deposit to export.de@troostwijkauctions.com in order to receive a refund.
• Non-EU buyers must return a copy of the electronic export declaration (EX-A with MRN - for verification only) or, if the value of the goods is lower, a completed export declaration with a stamp from the EU border customs office to export.de@troostwijkauctions.com in order to get the deposit refunded.
