KOHNLE - Inert Gas Continuous Belt Furnace - Köhnle Belt Furnace - 2023

Technical data of the HTO:

The maximum oven temperature is 1,000 °C.
The working temperature range is 850–950 °C and 450–500 °C.
The length of the infeed table is approx. 650 mm.
The usable width of the furnace belt is 92 mm.
The inner length of the usable space is 1,000 mm.
The glow channel inlet height is 60 mm.
The usable area is 0.092 m².
The cooling channel length is approx. 1,750 mm.
The length of the run-out table is approx. 320 mm.
The oven length on the outside is approx. 5,520 mm.
The connected load of the electric heating is 9.6 kW.
The inert gas consumption is approx. 2–2.5 Nm³/h.
The nitrogen jet at the furnace inlet and outlet is approx. 1–2 Nm³/h.
The flushing quantity of nitrogen per flush is approx. 0.11 Nm³.
The number of temperature control zones is 2.
The oven time is about 1-10 minutes.
The belt speed is between 100 and 1,000 mm/min.


Technical data of ammonia splitter:

The working temperature is 950°C.
The connected load of the electric heater is 3.5 kW.
The ammonia consumption is approx. 0.9 kg/h.
The output of the fission gas is approx. 2.5 Nm³/h.

Technical data of the control system:

The dimensions are 1,200 x 1,000 x 250 mm (W x H x D).
The electrical connection is via 400 V / 230 V at 50 Hz.
The control voltage is 24 V.