1 / 16
Mixed lot of cylindrical pins / clamping pins / dowel pins – sorted stock
- Current bid
- Status
€
Total bid amount
See total breakdown
Total bid amount
See total breakdown
€
Max bid amount
See total breakdown
Max bid amount
See total breakdown
Lot specifications
- Quantity
- 1
- Margin
- No
- Dimension l
- 1200mm
- Dimension w
- 800mm
- Terms of delivery
- Loaded on truck
Description
Mixed lot of cylindrical pins / clamping pins / dowel pins – sorted stock
The pictured cabinet is not part of the offer.
Stock of cylindrical pins, tension pins and dowel pins, stored in approx. 200 storage containers as well as original packaging.
The holdings are largely sorted and labelled, mainly according to diameter × length.
Stock of cylindrical pins, tension pins and dowel pins, stored in approx. 200 storage containers as well as original packaging.
The holdings are largely sorted and labelled, mainly according to diameter × length.
In some cases, original boxes from well-known manufacturers (e.g. JXGER / fastening technology) are available with clear labelling.
The following types, among others, can be clearly derived from the labels:
• Cylindrical pins according to DIN 6325
• Clamping pins (slotted)
• Cylindrical pins with internal thread
• Versions m.lg (medium length)
• Individual special and remaining items
Quantity / Scope
• Approx. 200 storage containers or packages
• Mixture of individual pins, partial quantities and original cartons
• Quantities per dimension not counted
in full• Sold only as a complete bundle
Condition
• Stock / used
• Visually good to typical of stock
• Not measured or standard-tested
• No guarantee of completeness per dimension
Scope
of delivery• Contents of the approx. 200 storage containers and packages
• No steel cabinet, no shelves
• Diameter: approx. Ø3 mm to Ø16 mm
• Lengths: approx. 10 mm to 120 mm
• Types:
• Cylindrical pins
• Clamping pins
• Pins with internal thread
• Standards (partly indicated): DIN 6325, other DIN possible
• Material: Steel, partly hardened (according to packaging specifications)
• Lengths: approx. 10 mm to 120 mm
• Types:
• Cylindrical pins
• Clamping pins
• Pins with internal thread
• Standards (partly indicated): DIN 6325, other DIN possible
• Material: Steel, partly hardened (according to packaging specifications)
Remarks
unaudited
Additional details
Please note that all items are sold used and untested unless expressly stated otherwise. The respective article description is decisive.
For detailed information on warranty and guarantee conditions, please refer to the auction conditions.
Note: Late or missed pickup may incur additional storage, handling, or disassembly costs that are the responsibility of the buyer.
