1 / 13
MAIER - MAIER ML 32 E - Universal lathe - 2003
- Current bid
- Status
€
Total bid amount
See total breakdown
Total bid amount
See total breakdown
€
Max bid amount
See total breakdown
Max bid amount
See total breakdown
Lot specifications
- Quantity
- 1
- Margin
- No
- Brand
- MAIER
- Type
- MAIER ML 32 E
- Year of build
- 2003
- Serial number
- 03292
- Machine weight
- 2500kg
- Terms of delivery
- Ex foundation-unpackaged
Description
Manufacturer / Model: MAIER ML 32 E
Type: Sliding-head / Swiss-type CNC lathe
Control unit (CNC): GE Fanuc 16i-T (MAIER Pro interface)
Bar capacity / max. turning diameter: Ø 32 mm
Max. turning length: 310 mm
Spindles: Main spindle + counter spindle (subspindle)
C-axes: C-axis on main spindle and counter spindle
Max. spindle speed: up to 6000 rpm
Rear-end machining: Available / rear-end machining fitted
Coolant: Oil or emulsion
Material feed / Bar feeder: IEMCA BOSS 545 E R (see photos & dataplate)
Material feed - bar feeder year / type plate: IEMCA BOSS 545 E R, 2003 (850 kg) — check dataplate for full spec
Year of manufacture: 2003
Machine weight: approx. 2,500 kg
Electrical: see machine dataplate (AC 220 V / control DC 24 V / total approx. 16 kW)
Machine ID / Serial (plate): Maier plate visible on machine (type ML 32 E, Masch.-Nr. 03 292) — verify on-site.
Bar feeder ID (plate): IEMCA BOSS 545 E R, serial on plate (see photos).
Condition notes: Visual wear, tooling blocks, chip conveyor pumps present; barfeeder covers present.
Alarms / Error on power-up: GE Fanuc alarm shown on screen — **"972 NMI OCCURRED IN OTHER MODULE / SLOT 02"** and **"975 BUS ERROR"** (see photos).
Remarks: Machine powers to CNC but shows communication / bus fault (see error). Sold as-is; r.
Approx. own mass (for listing): 2,500 kg (approx.)
Type: Sliding-head / Swiss-type CNC lathe
Control unit (CNC): GE Fanuc 16i-T (MAIER Pro interface)
Bar capacity / max. turning diameter: Ø 32 mm
Max. turning length: 310 mm
Spindles: Main spindle + counter spindle (subspindle)
C-axes: C-axis on main spindle and counter spindle
Max. spindle speed: up to 6000 rpm
Rear-end machining: Available / rear-end machining fitted
Coolant: Oil or emulsion
Material feed / Bar feeder: IEMCA BOSS 545 E R (see photos & dataplate)
Material feed - bar feeder year / type plate: IEMCA BOSS 545 E R, 2003 (850 kg) — check dataplate for full spec
Year of manufacture: 2003
Machine weight: approx. 2,500 kg
Electrical: see machine dataplate (AC 220 V / control DC 24 V / total approx. 16 kW)
Machine ID / Serial (plate): Maier plate visible on machine (type ML 32 E, Masch.-Nr. 03 292) — verify on-site.
Bar feeder ID (plate): IEMCA BOSS 545 E R, serial on plate (see photos).
Condition notes: Visual wear, tooling blocks, chip conveyor pumps present; barfeeder covers present.
Alarms / Error on power-up: GE Fanuc alarm shown on screen — **"972 NMI OCCURRED IN OTHER MODULE / SLOT 02"** and **"975 BUS ERROR"** (see photos).
Remarks: Machine powers to CNC but shows communication / bus fault (see error). Sold as-is; r.
Approx. own mass (for listing): 2,500 kg (approx.)
Remarks
Uncheked
Documents
18,516 kg
CO₂e
This is the amount of CO₂ emissions you could save by purchasing this item pre-owned instead of new.For comparison, an Berlin - Lisbon flight corresponds to 169 kg CO₂e per passenger.
