OCS - SP - Labellers and Coders - 2015

OCS Type TQS-SP Serialization solution for folding cartons (Track & Trace) This automatic serialization solution has a maximum output of 300 folding cartons/min. The system can be used in a line configuration with automatic product feed or as a stand-alone unit with manual product feed. Retrofitting into packaging lines is possible at any time. The objects to be inspected are fed in from the left side via a 500 x 200 mm (width-adjustable) infeed belt. The objects are transferred individually to the TQS InkPrint printing system and pass through a light barrier. The folding carton picked up by the printing system is printed on both sides according to the specified settings, if necessary. The folding carton is then evaluated by a camera system. Objects identified as defective are pneumatically ejected at the end of the discharge belt. After print verification, objects that are found to be good are conveyed to the right via the discharge belt (600 x 200 mm). Camera resolution: 1296 x 966 px; field of view: 60 x 40 mm; color: mono Printing – inkjet (thermal); both sides; Resolution: 300/600 dpi; print height: 50.8 mm The control elements and electrical components are housed in a switch box above the serialization system. This section also contains a 15-inch touchscreen with a control menu that can be used to enter and retrieve settings.