Current bid
Status

Activate Auto-bid

Recommended

About this lot

- It consists of:
- Hydraulic shear: hydraulic pump with 2 x 7.50 KW motors, cutting capacity: 4 x Ø 25 mm bars or 8 x x Ø 16 mm bars - Unloading table (1): with motorized rollers that can rotate in both directions, movable stop to define size, length 12350 mm, working width approx. 770 mm, 2 bar pushers to the table (2).
- Intermediate table (2): with motorized rollers that can rotate in both directions, total width approx. 540 mm, with spacer that is pneumatically raised to allow the bars to pass to the work table (3).
- Work table (3): with motorized rollers that can rotate in both directions, total width approx. 830 mm, with lifting bars.

Important:
- The 2 yellow OSCAM L bar benders seen in some photographs are NOT included. These machines and their accessories are sold at this same auction under lot numbers 3 and 21. Anything that is included in those lots 3 and 21 is not included in this lot number 14.

- Operating conditions of this machine: unchecked.
- This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs.
Remarks:
It consists of a hydraulic shear. The motor of the hydraulic pump is 7.5 kw and has two motors the pump and there is another motor on top. Shoot shot shot. The tables have a length of 12,350 mm with motorized rollers and a working width of approximately 770 mm is a pusher with a displacement from where the faults end of approximately 12,350 mm -3500 mm. The second table which is approximately 85 mm lower has a total width of approximately 1370 mm also with rollers, but it makes a first table of width 540 mm and another on the bending machine side of approximately 830 mm. This separator simply raises and lowers Documented pneumatics. I believe that from the first table he throws them by gravity to the second and from the second they pass them to the third. place the photos well that those of the electrical panel of the shear were at the end of everything Cutting capacity 8 x 16 mm bars or 4 x 25 mm bars The pushers send the parts into the middle and then there are some bars that go up and down and tilt outwards, each other inwards and the rollers rotate in the direction you need. Let's go to the end of those bars and we have to put some arrows to see how it works.
Lot number:
A7-35580-14
Sold by:
Commercial Seller

Lot specifications

Quantity
1
Margin
No
Machine weight
15000kg
Dimension l
13600mm
Dimension w
3070mm
Dimension h
2820mm
Terms of delivery
Loaded on truck

Documents

Attention please!
All items are sold as used and unchecked. For more detailed information, please refer to the auction terms and conditions. Contact for technical inquiries and appointment request for visits: Emilio Sobrado Email: e.sobrado@tbauctions.com Pick-up is only possible on the following dates and by appointment with the Surplex logistics department: from 23.09.2025 to 25.09.2025 from 9:00 a.m. to 1:00 p.m. and from 3:00 p.m. to 6:00 p.m. The collection deadline is September 25th. Items not collected until that day will be transferred and the buyer will assume the costs of transport and subsequent storage.

Frequently Asked Questions

How can I bid on a lot?

To place a bid, you need to have an account with Surplex. You can create one by clicking on 'Create Account' at the top right corner of our website. Once registered and after completing your profile, you can start bidding on your desired items.

What is reserve price?

A reserve price is the (non-visible!) minimum amount that a seller has set for a lot and is the lowest price for which the seller is willing to sell. The highest bidder who meets or exceeds this price wins.

If this price is not met, you can still have a chance to win. The closer your bid is to the reserve price, the greater your chance of winning this lot.

The lot is awarded to the highest bidder whose bid is equal to - or higher than - the reserve price at the end of the auction. If the highest bid has met the reserve price or more, the lot is sold immediately for this price.

How much does it cost to buy at Surplex?

There is a fee, the buyer's premium, added to each lot you win. The amount of the fee is shown on each individual lot. You see the buyer's premium for each lot when you are logged in as a customer at Surplex. Note that VAT is always added to your bid unless otherwise stated.

What is an auto bid versus a manual bid?

An auto bid is a way for you to automatically participate in a bidding process. You enter an amount you are willing to pay for an item and then automatic bids are placed for you up to your maximum bid - but only if necessary. Your maximum bid is hidden from other bidders during the auction. Placed auto bids are indicated by an "A" after the placed bid in the bid history. You need to update a manual bid every time someone outbids you. Keep in mind that an auto bid in the same level as a later manual bid will always lead the auction - because it was placed first.

How does the payment process work?

Won an item in an auction? Here’s how to complete your payment.

  1. Go to "My Purchases" in your Surplex profile and select "Ready for Checkout."

  2. Choose the lots you want to pay for and click the checkout button.

  3. Review your details and make adjustments if needed.

  4. Agree to the terms and conditions to proceed to the payment page.

  5. Confirm all details – changes are not possible afterward.

Your payment order will be generated, and you can pay immediately.

  • Bank transfer: Receive an invoice in advance.

  • Instant payment (e.g., iDeal, Bancontact): Invoice available in your account after payment.

Sell at Surplex

Do you have something to sell?

Simply tell us what’s for sale, and we’ll determine its value! With expert knowledge and an up-to-date auction price database, Surplex offers market-driven evaluations that set you up for sales success.

more from the

Same auction

View all

you might like these

Recommended lots

Download the Surplex app now!

App storeGoogle play