STANKOIMPORT - 5A140 - Gear shaping machine

STANKOIMPORT KOMSOMOLEC 5A140 Gear shaper Largest gear wheel module: 8 mm Largest gear wheel diameter: 500 mm Largest gear wheel rim width: 100 mm Spindle travel: 150 mm Largest spindle travel: 125 mm Diameter of product spindle flange or work table: 560 mm Base hole in table or product spindle flange: 110 mm Number of double strokes: 18 Range of double stroke changes: 55-560/min Peripheral stroke range: 6-590 mm/min Radial feed range: 0.02-0.2 mm/s Distance between bottom plane of base and table working surface: 920 mm Largest distance between table surface and tool spindle face: 270 mm Smallest distance between table surface and tool spindle face: 120 mm Largest distance between table axis and tool axis: 355 mm Smallest distance between table axis and tool axis: 0 mm Limbus and nonius value for setting the product and tool spacing: 0.01 mm Automatic sliding-back of table travel of table relative to tool axis: 355 mm Rapid table travel speed: 1.5 m/min High-speed table rotation: 4.5 rpm Boring depth: 25 mm Tool offset at idle speed: 0.5 mm Amount of stand offset when tool offset at an angle: ± 20 mm Number of motors: 6 Main drive motor power: 4/4.5/7.5 kW Hydraulic drive motor power: 2.2 kW Table rotation accelerator motor power: 0.75 kW Cooling pump motor power: 0.6 kW Lubrication pump motor power: 0.25 kW Peripheral feed motor power: 2.4 kW Dimensions (L x W x H): 1975 x 1690 x 2510 mm Power supply: 3x 380 V; 50 Hz Weight of machine: 7500 kg Equipment of the slotting machine Spindle taper: Morse 5 Set of changewheels Tool holders Technical documentation of the machine