1 / 5
STORK - SX 4000/5600 + ATM ES-2000 Robot - Injection Moulding Machine - 1997
- Current bid
- Status
€
Total bid amount
See total breakdown
Total bid amount
See total breakdown
€
Max bid amount
See total breakdown
Max bid amount
See total breakdown
Lot specifications
- Quantity
- 1
- Margin
- No
- Brand
- STORK
- Type
- SX 4000/5600 + ATM ES-2000 Robot
- Year of build
- 1997
- Terms of delivery
- Loaded on truck
Description
Serial number: X42252
Machine type: Injection Moulding Machine
Clamp unit: 400T (Tonnage Group G0 400T–450T)
Injection unit: 5600
Injection Specifications:
- Screw Ø: 97 mm
- Screw type: GP mixing for G
- Intensification ratio: 9.42
- Max. shot weight (PS): 253 g
- Injection capacity (cm³): 3394
- Injection rate: 550.4 cm³/s
- Max. screw stroke: 450.2 mm
- Max. hydraulic injection pressure: 170 bar
- Specific injection pressure: 1600 bar
Clamping Unit:
- Tie bar spacing: 750 mm × 750 mm (H × V)
- Mould height: 300 – 885 mm
- Max. platen distance: 1605 mm
- Location ring Ø: 175 mm
- Location screw (MX): M20
- Core pulling: 2 sets
Power Requirements:
- Voltage: 400 V
- Drive power: 124.3 kW
- Heating wattage: 44 kW
- Total power: 168.3 kW
- Current requirement: [Not specified]
Robot: ATM ES2000
Max. water heater temperature: 95 °C
Machine dimensions: 9600 × 2200 mm
Machine weight: [Not specified]
Barrel insulation: Yes (all zones)
Machine type: Injection Moulding Machine
Clamp unit: 400T (Tonnage Group G0 400T–450T)
Injection unit: 5600
Injection Specifications:
- Screw Ø: 97 mm
- Screw type: GP mixing for G
- Intensification ratio: 9.42
- Max. shot weight (PS): 253 g
- Injection capacity (cm³): 3394
- Injection rate: 550.4 cm³/s
- Max. screw stroke: 450.2 mm
- Max. hydraulic injection pressure: 170 bar
- Specific injection pressure: 1600 bar
Clamping Unit:
- Tie bar spacing: 750 mm × 750 mm (H × V)
- Mould height: 300 – 885 mm
- Max. platen distance: 1605 mm
- Location ring Ø: 175 mm
- Location screw (MX): M20
- Core pulling: 2 sets
Power Requirements:
- Voltage: 400 V
- Drive power: 124.3 kW
- Heating wattage: 44 kW
- Total power: 168.3 kW
- Current requirement: [Not specified]
Robot: ATM ES2000
Max. water heater temperature: 95 °C
Machine dimensions: 9600 × 2200 mm
Machine weight: [Not specified]
Barrel insulation: Yes (all zones)
Remarks
unchecked
