1 / 36
TBT - ML 300-4-1450 - Deep Hole Drilling Machine
- Current bid
- Status
Lot specifications
- Quantity
- 1
- Margin
- No
- Brand
- TBT
- Type
- ML 300-4-1450
- Year of build
- 2006
- Serial number
- 106292-11
- Drilling capacity
- 20mm
- Speed till n=
- 1500rpm
- Stepless speedcontrol
- Yes
- Drilling depth
- 1450mm
- Coolant pump
- Yes
- Engine power (kW)
- 55kW
- Manual present
- Yes
- Machine weight
- 13600kg
- Dimension l
- 8190mm
- Dimension w
- 2840mm
- Dimension h
- 2500mm
- HS Code
- 84592100
- Terms of delivery
- Free on truck
Description
Hours 81860,84h
Description:
The TBT ML 300-4-1450 is a high-precision, four-spindle deep hole drilling machine for gundrilling (ELB method). It enables parallel multiple machining with high surface quality and drilling accuracy. It has a robust design, Siemens control system and integrated cooling and high-pressure systems.
Specifications:
Number of spindles: 4
Spindle spacing: 120 mm
Drill carriage stroke: 750 mm (depending on loss length)
Drilling range (in steel St 60): Ø 4 – 20 mm
Drilling depth: approx. 1,450 mm
Drilling system: Gun drilling (ELB)
Electrical data:
Operating voltage: 400 V AC
Frequency: 50 Hz
Total connected load: 55 kW
Rated current: 110 A
Main fuse: 315 A
PLC control: Siemens S7-300
Control panel: Siemens OP17
Drive units:
Spindle drive: Dietz FDRU 112 MC/4A-H – 4 kW per spindle / 1,500 min⁻¹
Feed drives (Z/W axis): Siemens 1FT5074, INA/Spieth ball screws
Feed speed: 10 – 15,000 mm/min
Rapid traverses: 15,000 mm/min
Tailstock / Workpiece Clamping:
Hydraulically adjustable tailstock – SEW RF47DV132S2 – 5.5 kW – 254 min⁻¹
Pressure sleeve / timing belt / proximity switch: Spieth / Balluff
Coolant and high-pressure system:
Coolant tank: pure oil 700 l / dirty oil 1,000 l
High Pressure Pump: Moog Radial Piston Pump – 18.5 kW – 1,500 rpm⁻¹ – 10 – 230 l/min – 33 bar
Conveyor:
Manufacturer: Astos
Type: Magnetic
Motor power: 0.37 kW
Speed: 1,370 min⁻¹
Chip quantity: approx. 75 kg/h
The TBT ML 300-4-1450 is a high-precision, four-spindle deep hole drilling machine for gundrilling (ELB method). It enables parallel multiple machining with high surface quality and drilling accuracy. It has a robust design, Siemens control system and integrated cooling and high-pressure systems.
Specifications:
Number of spindles: 4
Spindle spacing: 120 mm
Drill carriage stroke: 750 mm (depending on loss length)
Drilling range (in steel St 60): Ø 4 – 20 mm
Drilling depth: approx. 1,450 mm
Drilling system: Gun drilling (ELB)
Electrical data:
Operating voltage: 400 V AC
Frequency: 50 Hz
Total connected load: 55 kW
Rated current: 110 A
Main fuse: 315 A
PLC control: Siemens S7-300
Control panel: Siemens OP17
Drive units:
Spindle drive: Dietz FDRU 112 MC/4A-H – 4 kW per spindle / 1,500 min⁻¹
Feed drives (Z/W axis): Siemens 1FT5074, INA/Spieth ball screws
Feed speed: 10 – 15,000 mm/min
Rapid traverses: 15,000 mm/min
Tailstock / Workpiece Clamping:
Hydraulically adjustable tailstock – SEW RF47DV132S2 – 5.5 kW – 254 min⁻¹
Pressure sleeve / timing belt / proximity switch: Spieth / Balluff
Coolant and high-pressure system:
Coolant tank: pure oil 700 l / dirty oil 1,000 l
High Pressure Pump: Moog Radial Piston Pump – 18.5 kW – 1,500 rpm⁻¹ – 10 – 230 l/min – 33 bar
Conveyor:
Manufacturer: Astos
Type: Magnetic
Motor power: 0.37 kW
Speed: 1,370 min⁻¹
Chip quantity: approx. 75 kg/h
Documents
Additional details
Abholtage: Verladung:
nur nach Vereinbarung
Besichtigung:
Nur unter Voranmeldung an david.polotzek@surplex.com
Alle Artikel werden als gebraucht und ungeprüft verkauft, falls nicht anders angegeben.
Bitte beachten Sie die Artikelbeschreibung.
Genauere Informationen zu Garantie und Gewährleistung entnehmen Sie bitte den Versteigerungsbedingungen.
