Aukcija 'Quality Metalworking Machines': Lot br. 1 MATEC 30 HVS 7-Axis Machining and Turning-Milling Center Poljska, 42-600 Tarnowskie Góry

Zatvaranje aukcije
za 20 dan(a) 9 h
13.06.2022, 11:00 sati
Trenutno najviša ponuda
0
7 promatrača
Prijavite se za sudjelovanje u dražbi
29.500
Početna cijena
Licitirati
Upotrijebi nadmetača
30.500 €
31.500 €
32.500 €
Zatvaranje aukcije
za 20 dan(a) 9 h
13.06.2022, 11:00 sati
Trenutno najviša ponuda
0
7 promatrača

Pojedinosti

Imate li bilo kakvih pitanja u vezi artikla? Molimo da naš kontaktirate.
Pojedinosti ponude
Naziv MATEC 30 HVS 7-Axis Machining and Turning-Milling Center
Broj artikla 743865
Proizvođač MATEC
Tip 30 HVS
Preporuke
Top lot
Artikli sa osobnom preporukom
Dokumenti
LOT_1_MATEC_30_HVS_7-Axis_Machining_and_Turning-Milling_Center__YOM_2008_compressed.pdf
Snimke
Video 1, Video 2, Video 3, Video 4
Godina proizvodnje 2008
Artikl dostupan od immediately
Stanje artikla
Lokacija Prikaži na karti Poljska, 42-600 Tarnowskie Góry
Prikaži na karti
Svi artikli na ovoj lokaciji
Opis artikla
  • control: BOSCH Rexroth
  • travers:
    • X-axis: 3000 mm
    • Y-axis: 600 mm
    • Z-axis (horizontal): 800 mm
    • Z-axis (vertical): 700 mm
  • rapid traverse:
    • X-axis: 48 m/min.
    • Y-axis: 48 m/min.
    • Z-axis: 48 m/min
  • 1-axis NC swivel head
  • swivelling: +/- 105 degrees
  • direct measuring system: +/- 3 arcseconds
  • max. tangent torque: 4200 Nm clamped
  • max spindle motor speed: 8000 rpm
  • spindle torque 216 Nm (40% DC), 153 Nm (100% DC)
  • tool places: 128
  • tool holder: HSK 63A
  • 1 NC rotary table with direct drive
  • design for turning and positioning
  • holding plate: Ø 630 mm with T grooves installation position
  • holding plate horizontal
  • center alignment: Ø 60 mm
  • speed max.: 80 rpm power: 40% DC 5 kW, 100% DC 2,5 kW torque: 40% DC 600 Nm, 100% DC 270 Nm
  • transport load (depending on the speed): max. 1150 kg
  • holding plate vertical/horizontal
  • holding plate diameter: 250 mm
  • height of centers: standard 160 mm
  • 1 saw unit construction on the X-axis of the machine, coupled with the X-axis carriage
  • feed axis CNC controlled
  • saw blade diameter 460 mm
  • saw blade holder over ABS
  • quick change system
  • cooling with emulsion
  • 1 bar feeders for profiles and round materials consisting of:
    • load magazine for 5 bars, bars lenght max. 3000 mm, bars size diameter 120 mm and any rectangular dimensions that fit in an envelope circle 120 mm, but the smallest measure: 10 x 60 mm
  • automatic alignment station for centering the parts (fast electronic upgrade path)
  • bar feed unit - incl. profibus interface for communication with the machine
  • 2-jaw power chuck operated hydraulically
  • adjustable clamping pressure via proportional valve
  • version without baking
  • 1 set chuck jaw
  • 1 internal coolant supply (paper band filter) 70 bar
  • equipment of the machine for use of tools (DIN 69871) with internal coolant supply through the spindle and the tool
 
  • transport dimensions:
    • 1. machine: 5300 x 2700 x 3100 mm
    • 2. feeder: 4100 x 1500 x 1600 mm
    • 3. chip conveyor: 6800 x 900 x 1550 mm
    • 4. hydraulic unit: 2200 x 900 x 1200 mm
    • 5. fence: 2600 x 1300 x 700 mm
    • 6. control cabinet: 2400 x 900 x 2200 mm
    • 7. oil mist extraction: 2000 x 500 x 800 mm
    • 8. mist extraction support: 1000 x 500 x 1800 mm
    • 9. second tool storage: 2800 x 1100 x 2000 mm
    • 10. air conditioner: 600 x 600 x 600 mm
    • 11. hydraulic unit 2: 700 x 700 x 1000 mm
    • 12. other equipment: 1200 x 800 x 500 mm
 
  • offer does not include other machines, parts, tools, holders, and equipment which does not belong to the machine
 
  • please also take a look at the videos and PDF document of this machine

 

Prikaži prijevod
Automatski prijevod
Tehničke pojedinosti
radni hod po osi x 3.000 mm
radni hod po osi y 600 mm
radni hod po osi z 800 mm
upravljanje BOSCH Rexroth
stožac HSK 63A
položaji mjenjača alata 128
obrtni momenat ose 153 - 216 Nm
raspon brzine tokarenja 8.000 1/min
brzi hod 48 m/min
potrebna ukupna snaga 34 kW
Približna masa 26.500 kg
približne dimenzije ( d x š x v ) 19.000 x 2.700 x 3.100 mm
Imate li bilo kakvih pitanja u vezi artikla? Molimo da naš kontaktirate.
Troškovi i povlastice
provizije 18 %
Troškovi demontiranja i ukrcaja (obvezujuće) 2.500,00 €
Ukupna cijena plus PDV
Troškovi prijevoza nisu uključeni
Uvjeti dostave FCA Tarnowskie Góry, ukrcano na kamion
Uvjeti plaćanja 100% plaćanje prije preuzimanja
Porez / Kaucija U slučaju izvoza iznos poreza na račun zadržava se u vidu obračuna kaucije. Iznos će biti vraćen kupcu čim nam budu dostavljene sve izvozne isprave.
Provjera stanja
Informacije 42-600 Tarnowskie Góry, Poland

- address on request -
Viewing by prior appointment only!
Datum Četvrtak, od 09.06.2022, od 10:00 sati do 15:00 sati
Preuzimanje
Datum Ponedjeljak, od 27.06.2022 do
Petak, 01.07.2022, od 08:00 sati do 16:00 sati

Ponedjeljak, od 04.07.2022 do
Petak, 08.07.2022, od 08:00 sati do 16:00 sati
Surplex App za mobilno licitiranje!
Besplatno preuzimanje:
iPhone i iPad
Android

Artikli koje ste posljednje gledali Prikaži sve nedavno pregledane artikle

Praćeni artikli
Artikl je uklonjen. Poništiti