• Edgebander
• Serial number 8685206
• Total installed power 26 KW
• Edge thickness from 0.40 mm up to 8 mm
• Worpiece thickness from 8 mm up to 40 mm
• Minimum workpiece lenght 120 mm
• Minimum workpiece width 120 mm
• Feed speed: 16-28 m/min
• Feed motor 1.50 KW
• NT20S programmable control, PT software
• Joint trimming unit, 2 x motor 3.70 KW-12000 rpm
• Edge feeder for strips and roll, edge magazine for one edge coil
• Gluing unit with pot for granulated hot melt adhesive
• Pressure group with (1+3) rollers
• End trimming unit, 2 x motor 0.37 KW-12000 rpm
• Fine trimming unit, 2 x motor 0.73 KW-12000 rpm
• Profile trimming unit, 4 x motor 0.37 KW-12000 rpm
• Profile scraping unit
• Edge buffing unit, 2 x motor 0.37 KW-1330 rpm Mostra traduzione