Surplex gebruikte machines
Verkopen Surplex Trust
Smooth auction process - Surplex informs you about the current situation: more information

BIESSE Brema 2.2 Boor- & deuvelmachine
Duitsland, 33397 Rietberg

Heeft u vragen met betrekking tot de machine? Neem contact met ons op.
5 kijkers

Details

Print
Naam: BIESSE Brema 2.2 Boor- & deuvelmachine
Art. Nr.: 580442
Fabrikant: BIESSE
Model / Type: Brema 2.2
Documenten:
BIESSE_Brema_EKO_2-1.pdf
Bouwjaar: 2018
Machines beschikbaar vanaf: immediately
Machinekwaliteit: nooit gebruikt/ nieuw
Locatie: Duitsland, 33397 Rietberg
Leveringsvoorwaarden: FCA Rietberg, verlading op vrachtwagen
Kosten demontage & laden 500€ (binding)
Transportkosten: niet inclusief
serienummer: 1,000,022,351
werklengte x-as: 3,200 mm
werkbreedte y-as: 1,250 mm
werkhoogte y-as: 60 mm
gereedschapswisselaar: 8er
hoofdspindel: 6,5 Iso30 kW
boorkop verticaal x-as: 7 kom.
boorkop verticaal y-as: 7 kom.
boorkop horizontaal x-as: 3 kom.
boorkop horizontaal y-as: 1 kom.
zaagunit: 120mm
bediening: NC-Hops
afmeting plaatsinnname (l x b x h) ca.: 2800 x 1940 2000 mm
Afmetingen ca.: 2,800 x 2,200 x 2,200 mm
Gewicht ca.: 1,200 kg
Exhibition machine / subject to prior sale
ATTENTION Pictures may show accessories not included

nkl.
- Uninterruptible Power Supply (UPS)
- Single axis package for drill head
- 6,5 kW electrospindle
- Angle saw unit HSK-F 63
- 8-fold plate changer
- Y-reading device
- Preparation for outfeed transport
- Starter Kit "Clamex"
- NC-Hops 7.0 Machine License
- Free activation Hops 6

general product information "Biesse Brema EKO 2.2 CNC drilling machine
Brema Eko 2.2 is the new compact and versatile
vertical machining centre, which is ideal for
minimum space requirement Workpieces with different
Edit dimensions.
It offers the ideal solution for the "Just-in-Time
production, especially with the focus on milling
processing.
- Maximum equipment of the machine according to the
  Production requirements
- Maximum production efficiency due to elimination of
  Setup times
- Large variety of machining options

Brema EKO 2.2
CNC machining centre
X' machining range: 3200 mm
Y' machining range: 1250 mm

Workpiece dimensions                
(min - max) MIN MAX    
Length X 200 - 3200 mm
Height Y 35 - 1250 mm
Thickness Z 8 - 60 mm
Maximum workpiece weight 50 kg

** ratio of workpiece height (Y) to workpiece length (X)
   <= 0,75 for workpieces up to L=320mm
°° Ratio of workpiece height (Y) to workpiece length (X)
   <=1,5 for workpieces L>320mm

* For short workpieces, which can only be machined with one clamping
  pliers, all types of the pliers can also be clamped
  Processing possible. Exceptions are processing in
  area of the collet itself.

When machining at the height of the collets, a
turning of the workpiece may be necessary.

In any case, the desired machining operations must be carried out.
according to the workpiece dimensions (especially for
minimum requirements), the materials used and
of the machine configuration.

Machining areas of the tools
(the dimensions - min and max - refer to the tool axes)
                
Length (X) MIN MAX    
Drilling 0 - 3200 mm
Milling (with electric spindle) 0 - 3200^ mm
Grooving (with grooving saw blade)
in X direction 0 - 3200^ mm
Height (Y) MIN MAX    
Drilling 0 - 1250 mm
Milling (with electric spindle) 0 - 1250 Rf mm
Grooving (with grooving saw blade)
in X direction 25 - 1250 mm    
Thickness (Z) MIN MAX        
Horizontal bores 35
                                   0 - Ru mm    

(^) Clamping the collets
(°) The maximum dimension may be reduced, depending on
    the workpiece side which is being machined and from
   the position of the collets.

Workpiece reference system
The pre-positioning of the workpiece in longitudinal direction
(X-direction) takes place in the loading area on the left
machine side by a stop, which is located in a
is placed in a fixed position in the worktable. A
Laser photocell automatically reads the workpiece reference
in X (zero point); additionally, the same photocell reads
the real workpiece length, provided that this function is used in the machining
work program is activated. In the event that the
detected dimensions do not match those of the program
the machine does not perform any machining operations
off.

Machine structure
Standardized and sandblasted steel structure with through-hole
standard machine stand, which is designed for the installation of
is machined from linear guides and carriages.
The design enables the construction of machining
units on the front of the stand.

Workpiece positioning unit
The workpiece positioning system in X direction is
by two collets, which hold the workpiece during
Keep the machining phase clamped. The movement takes place
by means of two independently driven servo motors.
The collets are equipped with a system for detecting the
thickness of the workpiece, which makes it possible to work in
real time to adjust the program value and the necessary
to ensure precision in the Z-direction during machining
...to do.
Fully automatic opening and clamping during the
Processing phase for workpiece thicknesses between 8 - 60 mm.
(AXES X1-X2)

Workpiece contact surface
The workpiece contact surface on which the machining and
units, consists of a series of rubber-
of layered rollers, which determine the workpiece reference in
Form Z-direction. On the opposite side of the
processing unit, a back pressure system is installed,
which holds the workpiece optimally in the machine. The
Positioning takes place automatically via a brush-
loose motor depending on the workpiece thickness.
Working height of the workpiece support surface in the clamping
pliers: 900 mm (+/- 10 mm).
(M.O. AXIS)

Safety devices
To ensure the safety of the operator
the machine is equipped with a protection system,
which allows access to the machining area.
...is hindering.
The security system complies with the euro-
European machinery directive 2006/42/EC.
Control cabinet
The control cabinet of protection class IP54 is complete with
all power elements for the axis controls (basic
machine 5 axes).
The servo motors and the corresponding servo packs are
prepared for digital signal transmission and en-
speak the CE and EMV regulations (electromagnetic
table compatibility).

Converter and voltage connection
Converter and mains connection are designed for voltages
from 380 - 415 V (+-10%), 50/60 Hz.

Air conditioning unit for the electrical switch cabinet
The system is equipped with an air conditioning unit to
Temperature inside the switch cabinet below
40°C.

Teleservice
The Teleservice guarantees an immediate direct access to
accessed the CNC control of the machine via network.
In this way the machine data, the
Check user programs and the input/output signals
and install software updates.

Teleservice is provided:
- Real-time service intervention
- fast troubleshooting
- significant reduction of machine downtimes
- Software update in real time
* Teleservice services are available during
  warranty period and beyond free of charge.

DOCUMENTATION
Operating manual
Programming manual
Pneumatic and electrical circuit diagrams
Spare parts catalogue

EDITOR bSolid
The software package runs in a Windows environment and
allows the operator to mark the workpiece
as well as the definition of the machining and the machine-
nen setups. By means of a 3D simulation, the operators know
work for the generated programs with a 3D
machine model can be simulated.
bSolid contains the following functions:.

2D CAD environment complete with:

commands for geometry and text design on layers and
2D surfaces, including the typical tools for the machining
(lines, polylines, arcs, circles, ellipses,)
and for modification (moving, rotating, scaling,
Flip)

Dimensioning tools

Construction of user-defined, vertical, inclined and geo-
curved surfaces based on designed geometries
Full parametric mode (ability to create objects with formulas
and conditions)

- File management tools (copy, paste, reverse-engineer)
  gig/ Repeat) and design visualization tools
  (zoom, rotation view, orthogonal view of individual
  dueling surfaces)
- DXF, CIX and BPP file import
- Commands for milling, drilling and sawing on horizontal,
  vertical, sloping and curved surfaces, with the
  Possibility of a 2D simplification on these surfaces
  way (i.e. as 4-axis machining)
- commands for simple 2D pockets (like slots on the
  workpiece)
- Program "Wizard": Innovative control for the auto
  matic creation of programs on the basis of
  the rules on automatic connection
  between geometry and tools
- Independent management of multiple machines
- Management of measurement cycles
- Custom macro creation
- 3D workpiece simulation with visualization of the mate
  rial abrasion
- Tool management environment including:

Individual tool design (milling cutter, drill, saw-
and their 3D shape)

Definition and setup of aggregates

Copy and search for tools

Definition of the processing sequence

Environment for the definition of rules for automatic
Procedures

- Tool changer of the machine as 3D graphic environment:  
  This enables the loading or unloading of
  tools or aggregates from the tool changer
  and immediately displays the dimensions for checking
- Worktable 3D graphic environment included:

Real and reliable view of the 3D machine model

- Clamping situation
- Realistic movements of the work table and the
  Peeping Tom
- Work table with semi-automatic positioning and
  its configuration parameters (This command is a
  auxiliary means and replaces due to its limitation
  not the machine tooling. Therefore, before you switch off
  a simulation is always carried out during the execution of the program).
- Realistic simulation of the machining of the workpiece
  at the machine:

Simulation of real machine dynamics without starting the
Machine

- Simulation of workpiece processing in 3D graphics with
  Display of the material removal
- Collision check between all elements of the
  Machine:

Tools, spindles, aggregates, work tables, trolleys,
Vacuum modules under consideration of all possible
Error during the actual processing (Warning:
There is no kind of control over the actual-
the type and position of the work table, the type and position of the
of each clamping system is the responsibility of the operator).

- calculation of the workpiece machining in real time on
  of the machine

* Minimum PC requirements:
PC Intel Core 2 Duo 2.0 GHz
3 GB RAM
nVidia graphics card with 256 MB RAM
Resolution 1280x800 16M colors
At least 2 GB free space on the hard disk
* Recommended PC requirements:
- PC Intel Core i7 3.4 GHz
- 8 GB RAM
- nVidia Quadro graphics card with 1 GB RAM
- Resolution 1680x1050 16M colors
- At least 5 GB free space on the hard diskBrema Eko 2.2 is the new compact and versatile
vertical machining centre, which is ideal for
minimum space requirement Workpieces with different
Edit dimensions.
It offers the ideal solution for the "Just-in-Time
production, especially with the focus on milling
processing.
- Maximum equipment of the machine according to the
  Production requirements
- Maximum production efficiency due to elimination of
  Setup times
- Large variety of machining options

Brema EKO 2.2
CNC machining centre
X' machining range: 3200 mm
Y' machining range: 1250 mm

Workpiece dimensions                
(min - max) MIN MAX    
Length X 200 - 3200 mm
Height Y 35 - 1250 mm
Thickness Z 8 - 60 mm
Maximum workpiece weight 50 kg

** ratio of workpiece height (Y) to workpiece length (X)
   <= 0,75 for workpieces up to L=320mm
°° Ratio of workpiece height (Y) to workpiece length (X)
   <=1,5 for workpieces L>320mm

* For short workpieces, which can only be machined with one clamping
  pliers, all types of the pliers can also be clamped
  Processing possible. Exceptions are processing in
  area of the collet itself.

When machining at the height of the collets, a
turning of the workpiece may be necessary.

In any case, the desired machining operations must be carried out.
according to the workpiece dimensions (especially for
minimum requirements), the materials used and
of the machine configuration.

Machining areas of the tools
(the dimensions - min and max - refer to the tool axes)
                
Length (X) MIN MAX    
Drilling 0 - 3200 mm
Milling (with electric spindle) 0 - 3200^ mm
Grooving (with grooving saw blade)
in X direction 0 - 3200^ mm
Height (Y) MIN MAX    
Drilling 0 - 1250 mm
Milling (with electric spindle) 0 - 1250 Rf mm
Grooving (with grooving saw blade)
in X direction 25 - 1250 mm    
Thickness (Z) MIN MAX        
Horizontal bores 35
                                   0 - Ru mm    

(^) Clamping the collets
(°) The maximum dimension may be reduced, depending on
    the workpiece side which is being machined and from
   the position of the collets.

Workpiece reference system
The pre-positioning of the workpiece in longitudinal direction
(X-direction) takes place in the loading area on the left
machine side by a stop, which is located in a
is placed in a fixed position in the worktable. A
Laser photocell automatically reads the workpiece reference
in X (zero point); additionally, the same photocell reads
the real workpiece length, provided that this function is used in the machining
work program is activated. In the event that the
detected dimensions do not match those of the program
the machine does not perform any machining operations
off.

Machine structure
Standardized and sandblasted steel structure with through-hole
standard machine stand, which is designed for the installation of
is machined from linear guides and carriages.
The design enables the construction of machining
units on the front of the stand.

Workpiece positioning unit
The workpiece positioning system in X direction is
by two collets, which hold the workpiece during
Keep the machining phase clamped. The movement takes place
by means of two independently driven servo motors.
The collets are equipped with a system for detecting the
thickness of the workpiece, which makes it possible to work in
real time to adjust the program value and the necessary
to ensure precision in the Z-direction during machining
...to do.
Fully automatic opening and clamping during the
Processing phase for workpiece thicknesses between 8 - 60 mm.
(AXES X1-X2)

Workpiece contact surface
The workpiece contact surface on which the machining and
units, consists of a series of rubber-
of layered rollers, which determine the workpiece reference in
Form Z-direction. On the opposite side of the
processing unit, a back pressure system is installed,
which holds the workpiece optimally in the machine. The
Positioning takes place automatically via a brush-
loose motor depending on the workpiece thickness.
Working height of the workpiece support surface in the clamping
pliers: 900 mm (+/- 10 mm).
(M.O. AXIS)
Safety devices
To ensure the safety of the operator
the machine is equipped with a protection system,
which allows access to the machining area.
...is hindering.
The security system complies with the euro-
European machinery directive 2006/42/EC.

Control cabinet
The control cabinet of protection class IP54 is complete with
all power elements for the axis controls (basic
machine 5 axes).
The servo motors and the corresponding servo packs are
prepared for digital signal transmission and en-
speak the CE and EMV regulations (electromagnetic
table compatibility).

Converter and voltage connection
Converter and mains connection are designed for voltages
from 380 - 415 V (+-10%), 50/60 Hz.

Air conditioning unit for the electrical switch cabinet
The system is equipped with an air conditioning unit to
Temperature inside the switch cabinet below
40°C.

Teleservice
The Teleservice guarantees an immediate direct access to
accessed the CNC control of the machine via network.
In this way the machine data, the
Check user programs and the input/output signals
and install software updates.

Teleservice is provided:
- Real-time service intervention
- fast troubleshooting
- significant reduction of machine downtimes
- Software update in real time
* Teleservice services are available during
  warranty period and beyond free of charge.

DOCUMENTATION
Operating manual
Programming manual
Pneumatic and electrical circuit diagrams
Spare parts catalogue

EDITOR bSolid
The software package runs in a Windows environment and
allows the operator to mark the workpiece
as well as the definition of the machining and the machine-
nen setups. By means of a 3D simulation, the operators know
work for the generated programs with a 3D
machine model can be simulated.
bSolid contains the following functions:.

2D CAD environment complete with:

commands for geometry and text design on layers and
2D surfaces, including the typical tools for the machining
(lines, polylines, arcs, circles, ellipses,)
and for modification (moving, rotating, scaling,
Flip)

Dimensioning tools

Construction of user-defined, vertical, inclined and geo-
curved surfaces based on designed geometries
Full parametric mode (ability to create objects with formulas
and conditions)

- File management tools (copy, paste, reverse-engineer)
  gig/ Repeat) and design visualization tools
  (zoom, rotation view, orthogonal view of individual
  dueling surfaces)
- DXF, CIX and BPP file import
- Commands for milling, drilling and sawing on horizontal,
  vertical, sloping and curved surfaces, with the
  Possibility of a 2D simplification on these surfaces
  way (i.e. as 4-axis machining)
- commands for simple 2D pockets (like slots on the
  workpiece)
- Program "Wizard": Innovative control for the auto
  matic creation of programs on the basis of
  the rules on automatic connection
  between geometry and tools
- Independent management of multiple machines
- Management of measurement cycles
- Custom macro creation
- 3D workpiece simulation with visualization of the mate
  rial abrasion
- Tool management environment including:

Individual tool design (milling cutter, drill, saw-
and their 3D shape)

Definition and setup of aggregates

Copy and search for tools

Definition of the processing sequence

Environment for the definition of rules for automatic
Procedures

- Tool changer of the machine as 3D graphic environment:  
  This enables the loading or unloading of
  tools or aggregates from the tool changer
  and immediately displays the dimensions for checking
- Worktable 3D graphic environment included:

Real and reliable view of the 3D machine model

- Clamping situation
- Realistic movements of the work table and the
  Peeping Tom
- Work table with semi-automatic positioning and
  its configuration parameters (This command is a
  auxiliary means and replaces due to its limitation
  not the machine tooling. Therefore, before you switch off
  a simulation is always carried out during the execution of the program).
- Realistic simulation of the machining of the workpiece
  at the machine:

Simulation of real machine dynamics without starting the
Machine

- Simulation of workpiece processing in 3D graphics with
  Display of the material removal
- Collision check between all elements of the
  Machine:

Tools, spindles, aggregates, work tables, trolleys,
Vacuum modules under consideration of all possible
Error during the actual processing (Warning:
There is no kind of control over the actual-
the type and position of the work table, the type and position of the
of each clamping system is the responsibility of the operator).

- calculation of the workpiece machining in real time on
  of the machine
* Minimum PC requirements:
PC Intel Core 2 Duo 2.0 GHz
3 GB RAM
nVidia graphics card with 256 MB RAM
Resolution 1280x800 16M colors
At least 2 GB free space on the hard disk

* Recommended PC requirements:
- PC Intel Core i7 3.4 GHz
- 8 GB RAM
- nVidia Quadro graphics card with 1 GB RAM
- Resolution 1680x1050 16M colors
- At least 5 GB free space on the hard disk Functions:
- 2D CAD environment complete with:
- Commands for geometry and text design on layers and 2D surfaces, including the typical tools for design (lines, polylines, arcs, circles, ellipses,) and modification (move, rotate, scale, mirror) Dimensioning tools
Creation of user-defined vertical, inclined and curved surfaces based on designed geometries Full parametric mode (ability to connect objects with formulas and conditions)
- File management tools (copy, paste, undo/redo) and design visualization tools (zoom, rotation view, orthogonal view of individual surfaces)
- DXF, CIX and BPP file import
- commands for milling, drilling and sawing on horizontal, vertical, sloping and curved surfaces, with the possibility of working on these surfaces in a 2D simplified way (i.e. as 4-axis machining)
- Commands for simple 2D pockets (like slots on the workpiece)
- Program "Wizard": Innovative control for the automatic creation of programs based on the rules for automatic connection between geometry and tools
- Independent management of multiple machines
- Management of measurement cycles
- Custom macro creation
- 3D workpiece simulation with visualization of material removal
- Tool management environment including:
Individual tool design (cutters, drills, saw blades and their 3D shape)
Definition and setup of aggregates
Copy and search for tools
Definition of the processing sequence
Environment for the definition of rules for automatic processes
- Tool changer of the machine as 3D graphic environment:
This enables the loading or unloading of tools or units from the tool changer and immediately displays the dimensions for inspection
- Worktable 3D graphic environment included:
Real and reliable view of the 3D machine model
- Clamping situation
- Realistic movements of the work table and clamps
- Worktable with semi-automatic positioning and its configuration parameters (This command is an aid and does not replace machine tooling due to its limitations. Therefore, a simulation should always be carried out before executing the program).
- Realistic simulation of machining the part on the machine:
Simulation of real machine dynamics without starting the machine
- Simulation of workpiece processing in 3D graphics with display of material removal
- Collision check between all elements of the machine:
tools, spindles, units, work tables, carriages, vacuum modules, taking into account all possible errors during the actual machining operation (warning: there is no kind of control over the actual setup of the work table, the type and position of each clamping system is the responsibility of the operator).
- Calculation of the machining of the workpiece in real time on the machine

* Minimum PC requirements:
- PC Intel Core 2 Duo 2.0 GHz
- 3 GB RAM
- nVidia graphics card with 256 MB RAM
- Resolution 1280x800 16M colors
- At least 2 GB free space on the hard disk

Recommended PC requirements:
- PC Intel Core i7 3.4 GHz
- 8 GB RAM
- nVidia Quadro graphics card with 1 GB RAM
- Resolution 1680x1050 16M colors
- At least 5 GB free space on the hard disk


BH23 Plus drill head with individually retrievable spindles
The machining unit consists of 14 vertical and 4 horizontal spindles, which can be called up individually, as well as 1 grooving saw unit with saw blade diameter 120 mm.
The configuration of the machining unit is as follows:
- 14 vertical, individually recallable spindles positioned at a distance of 32 mm, for tool fixing by means of grub screws, of which:
- 7 spindles positioned in X direction
- 7 spindles are arranged in Y direction
- 4 horizontal, individually retrievable spindles positioned in X and Y direction, for tool fixing by means of grub screws, of which:
- 3 spindles positioned in X direction (3 units with double output) and
- 1 spindle is positioned in Y direction (1 unit with double output);
- 1 grooving saw unit with saw blade ø 120 mm, direction of rotation RIGHT - fixed working direction in 'X

Main features:
- Saw blade diameter 120 mm; max. working depth 25 mm;
- saw blade thickness 4 mm;
- RIGHT direction of rotation; tool fixing with screws;
- vertical pneumatic movement.
The machining unit is prepared for the installation of an electro-spindle.
A housing for chip extraction is included. The suction unit is automatically closed when the electro-spindle is not running.
The movement to the machining position is controlled by a fixed axis via a ball screw with linear guide and a guide carriage, which allows a drilling depth control with programmed speed.
(Z1 AXIS)


5,5 kW (7,4 PS) electrospindle with ISO30 adapter
Technical data:
- Power: 5.5 KW (7.4 PS) at 12,000 to 15,000 rpm in S1 mode
- Speed: 1,000 up to 24,000 rpm programmable via NC
- Clockwise direction of rotation
- For fast, manual tool change
- Pilot control of the spindle by means of pneumatic cylinder via linear guide and carriage
- The tool holder is not included.
- Max. tool diameter: 100 mm
- Max. Tool weight: 6 Kg.

The movement to the machining position is controlled by a fixed axis via ball screw with linear guide and carriage. A hood for chip extraction is included. The suction is automatically closed when the electro-spindle is not in use.


Angle saw unit ISO 30 (Ø 120 mm) for grooves in Y-direction
- The saw blade is not included in the delivery


Toolholder with ISO 30 - rotation right - for collet ERC32
For tools with cylindrical shank with diameter 6 - 20 mm.
Max. speed: 24.000 rpm
The collet chuck is not included.


Elastic collet ERC32 for tool - diameter 15/16 mm
Fitted on the tool holder, on the electro-spindle with manual tool change or on the unit, the elastic deformation of the collet allows perfect tool locking.
The diameter of the tool is within the indicated range.


8-fold tool change magazine - plate changer
8-fold plate changer, which can be equipped with tool holders and/or aggregates.

Technical data:
- distance between the collets: 113 mm
- Max. Number of tools in the changer: 8 with maximum diameter 100 mm
- Applicable units: see tool changer layout
- Max. tool diameter: see tool changer layout
- Max. tool length: see tool changer layout
- Max. Weight of a cone holder or aggregate including tools: 7.5 kg
- Max. total weight: 32 kg


Table extension for the loading and unloading table
1000 mm extension of the loading table at the machine infeed
1000 mm extension of the unloading table at the machine outlet
The maximum machinable workpiece length increases from 2600 to 3200 mm.


Starter Kit "Clamex
Includes:
- 1x P-System grooving cutter 100.4x7x30 for front edge incl. cutter arbor, tool holder and collet chuck
- 2x P-System Slotting cutter 100.4x7x35 for surface in X- and Y- direction, suitable for angular saw unit
The 2 angle saw units are not part of the starter kit and must be selected in the machine configuration!
- 1x Starter Set connector with 300 pairs Clamex P14 and 80 pairs Tenso P14
- Including macro "CLAMEX"


NC-Hops 7.0 Machine licence Bre.Ma. EKO
Postprocessor: CIX PP
Graphic variant system with WOP and CAD/CAM features for the creation of part variants with macro technology.
Very easy to use due to dialogue masks, supporting auxiliary geometry and variable drawing and dimensioning functionality.
Clear visualization through real 3D representation of the parts and all machining operations including approach and retract movements, tool compensation with tool display during part definition.

Technology definitions (depending on machine characteristics):
- Milling vertically on top surface
- Freely definable (also variable) speed and feed definitions and changes during machining
- Automatic calculation of the start-up strategies
- Milling definition based on contour definitions possible
- Vertical and horizontal drilling
- Grooving saw in X direction

Clear and concise definition of technology through colour and structured differentiation.

Integrated DXF import for vertical toolpaths and vertical drillings.
DXF export of machining operations.
Simplest additional definitions that can be combined as often as required, such as mirroring, shifting, rotating, zero offset, conditions, for- loops, while loops.
User-oriented position-independent comment definition.
Export and import of all variable values.
User-defined note and error message definition.
Extensive extension possibilities to various CAD, construction, parts lists and industry programs.
Implementation of machine-specific additions such as import of tool and machine data; user-specific interface design through free definition of system commands and extension of own definitions including icon reference and auxiliary drawings of the dialog masks.
Condition:
Operating system Windows 7, 8 or 10
Graphics card Open GL capable
Working memory: min. 8 GB

Recommended training: min. 3 days depending on previous knowledge


Free activation Hops 6

The warranty of this machine has expired! With the purchase of this machine you agree to this condition. The guarantee can be extended by Biesse at a charge. The costs amount to 2% of the list sales price for a further 6 months. This extension is always calculated from the end of the factory warranty!  
Surplex App voor mobiel bieden!
Gratis download:
iPhone & iPad
Android

Beschikbare machines in deze categorie

Fano
24-06-2020 15:08
0 biedingen
9,000€
BREMA GLV/M 3200 x 1400 CNC Machining center CNC-bewerkingscentra
Top Lot
Top Lot
regio Vicenza
16-06-2020 10:54
0 biedingen
1,800€
Museros
04-06-2020 11:06
2 biedingen
1,600€
Reinfeld
Vraag een offerte aan
op aanvraag
Vraag een offerte aan
Product weergeven
Rietberg
Vraag een offerte aan
op aanvraag
Vraag een offerte aan
Product weergeven
Rietberg
Vraag een offerte aan
op aanvraag
106,700€
Vraag een offerte aan
Product weergeven
Nersingen
Vraag een offerte aan
op aanvraag
Vraag een offerte aan
Product weergeven
Sancraiu
25-06-2020 10:20
1 bod
89,000€
Norderstedt
Vraag een offerte aan
op aanvraag
Vraag een offerte aan
Product weergeven
Norderstedt
Vraag een offerte aan
op aanvraag
Vraag een offerte aan
Product weergeven


Machines die u onlangs bekeken hebt

volglijst
Item verwijderd. Ongedaan maken