Kantenaanlijmmachine HOMAG O KAL 210/6A20/S2

Kantenaanlijmmachine HOMAG O KAL 210/6A20/S2
Tip
lotnr. 17
Sluitingstijd: 06-05-24 10:14
7,400 € Startbod
5 kijkers
Inloggen om te bieden
Gebruik maken van biedingsagent
plus veilingkosten en BTW
Kantenaanlijmmachine HOMAG O KAL 210/6A20/S2
06-05-24 10:14
Sluitingstijd
7,400 €
Startbod
Naam
Kantenaanlijmmachine HOMAG O KAL 210/6A20/S2
Artikelnummer
897706
Fabrikant
HOMAG
Model / Type
O KAL 210/6A20/S2
Video’s
Video 1
Bouwjaar
2008
Item beschikbaar vanaf
approx. 01.05.2024
Toestand item
Locatie
Duitsland, 47574 Goch-Asperden
opgeld
18 %
Kosten demontage & laden (binding)
600.00 €
Eindtotaal
excl. btw
Transportkosten
niet inclusief
Leveringsvoorwaarden
FCA Goch-Asperden, verlading op vrachtwagen
Betalingsvoorwaarden
100% vooruitbetaling voor afhaling
serienummer
0-200-21-6340
dikte werkstuk
12 - 40 mm
werkstuk overhang
30 mm
voeding
18 - 25 m/min
gezamelijke snij-inrichting
knipunit
voor-frees
profielfrees-unit
kanten polijst-unit
bediening
Power Control - PC22
instelmaat ca. (l x b x h)
7.800 x 910 x 1.800 mm
gewicht ca.
5.000 kg
The machine will not be available until around May 2024.

Basic machine
  • Continuous machine stand for setting up the processing unit
  • Workpiece support with roller rail, extendable approx. 800 mm
  • Glue roller drive for feed stop
  • Glue container lift for feed stop
  • Workpiece-operated glue container clamping
  • Adjustable infeed guide
  • Pneumatically controlled infeed stop
Workpiece transport device
  • Transport chain 80 mm wide
  • Precision running and guide surfaces hardened
  • Transport chain magnetically braked
Top pressure
  • driven by composite V-belt
  • Manual height adjustment
  • Digital position indicator
Technical data
  • Operating voltage: 400 Volt, 50/60 Hz
  • Feed rate: 18 - 25 m/min
  • Feed rate with FK11 profile cutter: max. 20 m/min
  • Working height: 950 mm
  • Working width for workpiece thickness 22 mm: min. 60 mm
  • Working width for workpiece thickness 40 mm: min. 105 mm
  • Workpiece protrusion: 30 mm
  • Workpiece thickness: 12 - 40 mm
  • Edge material strips: max. 0.4 - 20 mm
  • Strip edge cross-section: max. 900 mm²
  • Edge material roll: 0.3 - 3 mm
  • Edge cross-section for PVC: max. 135 mm²
  • Edge cross-section for veneer: max. 100 mm²
  • Roller diameter: max. 830 mm
  • Pneumatic connection: 7-8 bar
Noise protection joint + unit part
  • for the processing units
Joint trimming unit
  • 2 motors yes 3 kW
- Gluing unit A20 - 2 rollers
- Workpiece preheating
- Quickmelt hot melt gluing unit
- Quick clamping system
- Magazine 2 rolls manual
- Pressure zone C
- Snipping unit HL84/0.8 kW
- Pre-milling unit 1.5 kW
- Manual profile trimming unit FK11
- Exchangeable head set manually adjustable
- PROFIL PN10 finishing unit
- Finishing unit
- Buffing unit
Vertaling tonen
Automatische vertaling
Veilingnaam
Surplex Woodworking Auction (May)
lotnr.
17
Documenten
Specifieke veilingvoorwaarden
Inspectie
De exacte locatie is beschikbaar op aanvraag.
No fixed date. The items are in different locations (see item description). Viewing by appointment only!
Hebt u vragen over dit item? Neem contact met ons op.
Onze diensten
  • Persoonlijke service in 16 talen
  • Advies ter plaatse & van deskundigen
  • Op verzoek organisatie van het transport
  • Ondersteuning bij papierwerk en douaneafhandeling