SCHULER PDR 100/315 Excenterpers

SCHULER PDR 100/315 Excenterpers
Top Lot
lotnr. 8
Sluitingstijd: 14-05-24 14:06
6,000 € Startbod
3 kijkers
Inloggen om te bieden
Gebruik maken van biedingsagent
plus veilingkosten en BTW
SCHULER PDR 100/315 Excenterpers
14-05-24 14:06
Sluitingstijd
6,000 €
Startbod
Naam
SCHULER PDR 100/315 Excenterpers
Artikelnummer
914182
Fabrikant
SCHULER
Model / Type
PDR 100/315
Bouwjaar
niet bekend
Item beschikbaar vanaf
immediately
Toestand item
Locatie
Duitsland, 35398 Gießen
opgeld
18 %
Kosten demontage & laden (binding)
1,000.00 €
Eindtotaal
excl. btw
Transportkosten
niet inclusief
Leveringsvoorwaarden
FCA Gießen, verlading op vrachtwagen
Betalingsvoorwaarden
100% vooruitbetaling voor afhaling
gewicht ca.
7,500 kg
instelmaat ca. (l x b x h)
1,900 x 1,450 x 3,000 mm
  • Stroke rate: 30-80
  • Plunger overtravel max.: 105
  • Plunger overtravel time max. 0.22 at plunger stroke: 160
  • incl. circuit diagram, overhaul documentation, lubrication instructions, PLC printout
  • Press ready for immediate use
  • UVV until 04/2024
  • New clutch
  • New brakes
  • Operating hours: 171 hours
Operating modes:
  • 1- Set-up
  • 2- Single stroke two-handed
  • 3- Single stroke foot
  • 4- Automated single stroke
  • 5- Endurance run
Press was electrically overhauled and converted to Pilz SPS and Frei DSK 137-110. The clutch and brake were overhauled in mid-2021. The following overhaul work was carried out
  • Dismantle, clean and inspect the tappet and compensating cylinder
  • Connecting rod concentricity and crack checked OK.
  • New piston rod and barrel bushing for balance cylinder manufactured according to sample
  • 2 new groove rings and O-ring
  • Fit compensating cylinder and check function
  • Touch up and scrape connecting rod journals
  • Manufacture new clamping piece
  • Fracture protection was installed incorrectly
  • Align parts, new breaker plate
  • Bolt for lubrication
  • Ball socket missing, remake pin
  • Fit and retune tappet
  • 2 new spherical roller bearings for countershaft
  • Polish shaft
  • Replace 2 pressure reducers 1/2 inch and pressure hoses
  • New flat belt
  • Repair bolts for ratchet
  • Reseal rotor 
The overhaul costs amounted to over 11,000 euros net Vertaling tonen
Automatische vertaling
Veilingnaam
Machines and Accessories for Metal Processing
lotnr.
8
Documenten
Specifieke veilingvoorwaarden
Inspectie
De exacte locatie is beschikbaar op aanvraag.
No fixed date. The items are in different locations (see item description).

Viewing by appointment only! Please contact us in advance at lqu@surplex.com for an inspection appointment.
Ophalen
Maandag, 20-05-2024 tot
Vrijdag, 24-05-2024, van 08:00 Uur tot 16:00 Uur
Hebt u vragen over dit item? Neem contact met ons op.
Onze diensten
  • Persoonlijke service in 16 talen
  • Advies ter plaatse & van deskundigen
  • Op verzoek organisatie van het transport
  • Ondersteuning bij papierwerk en douaneafhandeling