1 / 10
ABUS - 1/4FN-3 - Electric Chain Hoist 250kg with Control Cylinder
- Aktualna oferta
- Status
€
Całkowita kwota oferty
Zobacz całkowite podsumowanie
Całkowita kwota oferty
Zobacz całkowite podsumowanie
€
Maksymalna kwota oferty
Zobacz całkowite podsumowanie
Maksymalna kwota oferty
Zobacz całkowite podsumowanie
Specyfikacja przedmiotu
- Ilość
- 1
- Marża
- Nie
- Marka
- ABUS
- Typ
- 1/4FN-3
- Rok budowy
- 1986
- Numer seryjny
- 3L9274735-1
- Pojemnosc .
- 250kg
- Wysokosc podnoszenia
- 3m
- Pilot zdalnego sterowania
- Tak
- Polaczenie elektryczne
- 380V
- Wymiar calkowity L
- 600mm
- Wymiar calkowity W
- 350mm
- Wymiar calkowity H
- 1300mm
- Waga wlasna
- 60kg
- pozycją HS
- 84251910
- Warunki dostawy
- Ex fundacja bez opakowania
Opis
For sale is an ABUS electric chain hoist type 1/4FN-3 with a load capacity of 250 kg, permanently mounted on a hand trolley.
The hoist motor is designed
for 7.2 m/min Fine stroke 1.8 m/min
Control is via a 2-button control bottle (up/down)
Connected loads: 220/380 V, 50 Hz, 3 phases
The condition was confirmed on site by a function test via control system – chain runs cleanly, no jamming.
According to the plaque, the UVV test was last carried out by WEWIRA (next test in 2017).
The case has age-appropriate paint wear and scratches, the technology works.
The device is sold as a running carrier, without disassembly.
The hoist motor is designed
for 7.2 m/min Fine stroke 1.8 m/min
Control is via a 2-button control bottle (up/down)
Connected loads: 220/380 V, 50 Hz, 3 phases
The condition was confirmed on site by a function test via control system – chain runs cleanly, no jamming.
According to the plaque, the UVV test was last carried out by WEWIRA (next test in 2017).
The case has age-appropriate paint wear and scratches, the technology works.
The device is sold as a running carrier, without disassembly.
Uwagi
Electric chain hoist with functional up/down control via control bottle, no visible defects on the chain or hook.
Lifting height as indicated 3 m. Housing with clear paint scratches and rust on corners and chassis.
WEWIRA seal of approval (according to BGV D6) expired – UVV re-inspection required.
Still suitable for occasional workshop use or internal lifting.
No technical defects found during on-site test.
Lifting height as indicated 3 m. Housing with clear paint scratches and rust on corners and chassis.
WEWIRA seal of approval (according to BGV D6) expired – UVV re-inspection required.
Still suitable for occasional workshop use or internal lifting.
No technical defects found during on-site test.
Wideo
Zobacz szczegóły i przyjrzyj się przedmiotowi bliżej na tym wideo.
