SALVAGINI sheet metal processing center with punching/bending/storage line
- Przedmiot:03T-D2E-1
- Backnang, DE
1 / 46
- Aktualna oferta
- Status
Aktywuj auto-licytację
Zalecane
Informacje o tym przedmiocie
For sale is a fully automated, interlinked sheet metal processing center of the Salvagnini brand, consisting of:
• P4L-3220 Lean bending machine (built in 2019)
• S4Xe.40 punching and shearing unit (built in 2015)
• MVT4000 high-bay warehouse with integrated handling and control (built in 2015)
The system is designed to process large-format sheets up to 4064 × 1524 mm. The bending machine processes material up to 4 mm steel, depending on the strength. The storage system has a load capacity of 3,000 kg per pallet. The bending area is fully programmable in both directions up to ±135°.
Equipment:
• SiX control system, CAM software SIMULX, job management via JOBLINE. Console
• Roland R1000 Inline Thickness Detection
• Automatic output with SAP34. POS, sorting turntable & vacuum gripper
• Includes extensive tool package (round and form punching tools, neatly stored)
• Additional modules: CLA-SIM, CUT. SPC31, Soft-Brush Table
All components are fully installed and ready for operation. The machine structure looks well-maintained, the control units functional, sensors and cable management neatly routed.
The entire plant is located in Munich (D) and can be visited and demonstrated by appointment.
Further information and details can be found in the PDF documents.
Surplex Contact:
Anton Glas
a.glas@tbauctions.com +491711566417
• P4L-3220 Lean bending machine (built in 2019)
• S4Xe.40 punching and shearing unit (built in 2015)
• MVT4000 high-bay warehouse with integrated handling and control (built in 2015)
The system is designed to process large-format sheets up to 4064 × 1524 mm. The bending machine processes material up to 4 mm steel, depending on the strength. The storage system has a load capacity of 3,000 kg per pallet. The bending area is fully programmable in both directions up to ±135°.
Equipment:
• SiX control system, CAM software SIMULX, job management via JOBLINE. Console
• Roland R1000 Inline Thickness Detection
• Automatic output with SAP34. POS, sorting turntable & vacuum gripper
• Includes extensive tool package (round and form punching tools, neatly stored)
• Additional modules: CLA-SIM, CUT. SPC31, Soft-Brush Table
All components are fully installed and ready for operation. The machine structure looks well-maintained, the control units functional, sensors and cable management neatly routed.
The entire plant is located in Munich (D) and can be visited and demonstrated by appointment.
Further information and details can be found in the PDF documents.
Surplex Contact:
Anton Glas
a.glas@tbauctions.com +491711566417
- Uwagi:
- The machine is fully functional and was in productive use until the very end. The optical signs of wear correspond to normal production operations. No indication of structural damage.
Control units, sensors and cabling look well-maintained. The vacuum grippers and storage lifts are mechanically intact, sensor displays (e.g. Roland R1000) are in operation. The tool package is completely and neatly sorted.
No original packaging available – machines are currently set up in Halle.
Viewing possible at the Munich location. Dismantling, loading and transport after consultation with the provider.
- Numer przedmiotu:
- 03T-D2E-1
- Lokalizacja:
- Backnang, DE
- Sprzedawane przez:
- Sprzedawca firma
Specyfikacja przedmiotu
- Ilość
- 1
- Marża
- Nie
- Marka
- Salvagnini
- Typ
- P4L-3220 / S4Xe.40 / MVT4000
- Rok budowy
- 2019
- Pojemnosc .
- 3t
- Dlugosc robocza
- 4064mm
- Szerokosc robocza
- 1524mm
- Kontrola, marka, typ
- Salvagnini SiX, JOBLINE.S4P4, SIMULX, IoT Connected
- Moc silnika (kW)
- 30kW
