DECKEL MAHO CNC DMC 63 V Universal Machining Centers
- Przedmiot:03E-7DM-1
- Steinen, DE
- Aktualna oferta
- Status
Aktywuj auto-licytację
Zalecane
Informacje o tym przedmiocie
Deckel Maho DMC 63V – used / defective
For sale is a vertical CNC machining center of the type DMC 63V from the manufacturer Deckel Maho, equipped with a Heidenhain control system. The machine was in productive use and has 20,480 operating hours.
Important note:
The machine is currently not fully functional:
• The tool changer is defective
• The Z-axis does not work reliably
Therefore, the machine is sold as a defective / hobbyist device. It is ideal as a parts dispenser or for expert users for repair. Existing accessories will be given as shown in the pictures.
Specifications:
• Type: DMC 63V
• Serial number: 28850007872
• Connection: 400 V / 3~ / 50 Hz
• Power consumption: 30 kVA
• Control: Heidenhain (software version: 280474-14)
• Operating hours: 20,480 h
Equipment:
• Tool magazine (chain changer) – currently without function
• Electric control panel with emergency stop and handwheel
• Clamping surface with T-slots
• Accessories available: various tool holders, clamping devices, control devices (see pictures)
• Large work area with good accessibility
For sale is a vertical CNC machining center of the type DMC 63V from the manufacturer Deckel Maho, equipped with a Heidenhain control system. The machine was in productive use and has 20,480 operating hours.
Important note:
The machine is currently not fully functional:
• The tool changer is defective
• The Z-axis does not work reliably
Therefore, the machine is sold as a defective / hobbyist device. It is ideal as a parts dispenser or for expert users for repair. Existing accessories will be given as shown in the pictures.
Specifications:
• Type: DMC 63V
• Serial number: 28850007872
• Connection: 400 V / 3~ / 50 Hz
• Power consumption: 30 kVA
• Control: Heidenhain (software version: 280474-14)
• Operating hours: 20,480 h
Equipment:
• Tool magazine (chain changer) – currently without function
• Electric control panel with emergency stop and handwheel
• Clamping surface with T-slots
• Accessories available: various tool holders, clamping devices, control devices (see pictures)
• Large work area with good accessibility
- Uwagi:
- Condition & Note:
The machine shows signs of wear and tear, but is visually in good condition overall. Due to the technical defects, it is sold without warranty or functional guarantee.
Inspection and test on site possible by arrangement. Pick-up only, no shipping.
- Numer przedmiotu:
- 03E-7DM-1
- Lokalizacja:
- Steinen, DE
- Sprzedawane przez:
- Sprzedawca firma
Specyfikacja przedmiotu
- Ilość
- 1
- Marża
- Nie
- Marka
- Deckel Maho
- Typ
- DMC 63 V
- Rok budowy
- 1998
- Numer seryjny
- 288500007872
- Taper iso
- SK40
- Podróz w osi x
- 630mm
- Podróz w osi y
- 500mm
- Podróz w osi z
- 500mm
37 949 kg
CO₂e
Tyle emisji dwutlenku węgla możesz zaoszczędzić, decydując się na zakup tego przedmiotu używanego zamiast nowego.Dla porównania, lot Berlin - Lizbona odpowiada 169 kg CO₂e na pasażera.
Mogą Ci się spodobać
