DECKEL MAHO DMC 65V CNC Universal Machining Centers
- Przedmiot:03E-7JN-1
- Steinen, DE
- Aktualna oferta
- Status
Aktywuj auto-licytację
Zalecane
Informacje o tym przedmiocie
Deckel Maho DMC 65V – Vertical CNC Machining Center (used)
For sale is a vertical CNC milling machine of the type DMC 65V from the manufacturer Deckel Maho, equipped with a Heidenhain control system. The machine is technically in operational condition overall, but has a defect in the sensor of the tool clamper. The spindle clamping works, but the control system sometimes does not recognize the tool correctly. Repair is possible for expert users.
The machine was used to process graphite materials – accordingly, deposits are visible in the working area, but the machine is structurally in good condition.
⸻
Technical data (from nameplate and sighting):
• Type: DMC 65V
• Serial number: 6586001682
• Control: Heidenhain CNC
• Voltage: 400 V / 50–60 Hz
• Power consumption: 60 kVA
• Total operating hours: 37,351 h
• Spindle running time: 1,688 h
⸻
Equipment:
• Automatic tool changer (sensor defective)
• T-slot clamping table with vise
• Coolant lines and interior lighting
• Control panel with screen and emergency stop
• Hand control unit (electric handwheel)
⸻
Accessories included:
• Large tool set with milling heads and holders (see photos)
• Various SK or HSK tool holders, clamping devices, tension wrenches
• Tool stands and accessories for set-up time optimization
For sale is a vertical CNC milling machine of the type DMC 65V from the manufacturer Deckel Maho, equipped with a Heidenhain control system. The machine is technically in operational condition overall, but has a defect in the sensor of the tool clamper. The spindle clamping works, but the control system sometimes does not recognize the tool correctly. Repair is possible for expert users.
The machine was used to process graphite materials – accordingly, deposits are visible in the working area, but the machine is structurally in good condition.
⸻
Technical data (from nameplate and sighting):
• Type: DMC 65V
• Serial number: 6586001682
• Control: Heidenhain CNC
• Voltage: 400 V / 50–60 Hz
• Power consumption: 60 kVA
• Total operating hours: 37,351 h
• Spindle running time: 1,688 h
⸻
Equipment:
• Automatic tool changer (sensor defective)
• T-slot clamping table with vise
• Coolant lines and interior lighting
• Control panel with screen and emergency stop
• Hand control unit (electric handwheel)
⸻
Accessories included:
• Large tool set with milling heads and holders (see photos)
• Various SK or HSK tool holders, clamping devices, tension wrenches
• Tool stands and accessories for set-up time optimization
- Uwagi:
- Condition:
• Used condition with typical optical wear
• Traces of processing due to graphite – cleaning recommended
• Sensor of the tool clamp defective, therefore sold expressly as used and partially defective
• Ideal for experienced repairers or as a cost-effective production solution after repair
- Numer przedmiotu:
- 03E-7JN-1
- Lokalizacja:
- Steinen, DE
- Sprzedawane przez:
- Sprzedawca firma
Specyfikacja przedmiotu
- Ilość
- 1
- Marża
- Nie
- Marka
- Deckel Maho
- Typ
- DMC 65V
- Rok budowy
- 2000
- Numer seryjny
- 08850001682
- Taper iso
- SK40
- Podróz w osi x
- 650mm
- Podróz w osi y
- 500mm
- Podróz w osi z
- 500mm
37 949 kg
CO₂e
Tyle emisji dwutlenku węgla możesz zaoszczędzić, decydując się na zakup tego przedmiotu używanego zamiast nowego.Dla porównania, lot Berlin - Lizbona odpowiada 169 kg CO₂e na pasażera.
Mogą Ci się spodobać
