DECKEL MAHO DMU 50 Evolution CNC Universal Machining Centers
- Przedmiot:03E-8HQ-1
- Steinen, DE
- Aktualna oferta
- Status
Aktywuj auto-licytację
Zalecane
Informacje o tym przedmiocie
For sale is a used DMU 50 eVolution, built in 1998, equipped with the Heidenhain TNC 426 controller and a high-frequency spindle up to 30,000 rpm. The machine was used in an air-conditioned environment primarily for processing graphite electrodes – ideal for applications in tool and mold making.
Technical key data:
• Year of manufacture: 1998
• Control: Heidenhain TNC 426
• Spindle speed: up to 30,000 rpm
• Axes: 5-axis simultaneous machining
• Taper mount: ISO/SK40
• Automatic tool changer
• Coolant pump & chip conveyor available
Machine Condition:
The machine is fully functional, but with visible signs of wear according to the year of manufacture. The interior and guides show deposits due to graphite processing, which should be taken into account during commissioning. The spindle runs, but is not freshly overhauled. Due to the high speed, the machine is particularly suitable for ultra-fine machining (e.g. graphite, plastic, aluminum).
Example:
The machine was mainly used to produce electrodes for the EDM process. Thanks to the high spindle speed and simultaneous 5-axis kinematics, it is ideally suited for the finest contours, hollow shapes and complex free-form surfaces.
Operating hours (according to the display):
• Control on: approx. 29,788 h
• Machine on: approx. 97,719 h
• Program run: approx. 36,831 h
Technical key data:
• Year of manufacture: 1998
• Control: Heidenhain TNC 426
• Spindle speed: up to 30,000 rpm
• Axes: 5-axis simultaneous machining
• Taper mount: ISO/SK40
• Automatic tool changer
• Coolant pump & chip conveyor available
Machine Condition:
The machine is fully functional, but with visible signs of wear according to the year of manufacture. The interior and guides show deposits due to graphite processing, which should be taken into account during commissioning. The spindle runs, but is not freshly overhauled. Due to the high speed, the machine is particularly suitable for ultra-fine machining (e.g. graphite, plastic, aluminum).
Example:
The machine was mainly used to produce electrodes for the EDM process. Thanks to the high spindle speed and simultaneous 5-axis kinematics, it is ideally suited for the finest contours, hollow shapes and complex free-form surfaces.
Operating hours (according to the display):
• Control on: approx. 29,788 h
• Machine on: approx. 97,719 h
• Program run: approx. 36,831 h
- Uwagi:
- The machine is in a functional, used condition, but has been visibly stressed due to its age and intensive use in graphite machining. It was in use until the end, is basically ready for operation and is ideal for simple or preparatory machining tasks, especially in toolmaking.
- Numer przedmiotu:
- 03E-8HQ-1
- Lokalizacja:
- Steinen, DE
- Sprzedawane przez:
- Sprzedawca firma
Specyfikacja przedmiotu
- Ilość
- 1
- Marża
- Nie
- Marka
- Deckel Maho
- Typ
- DMU 50 Evolution
- Rok budowy
- 1998
- Numer seryjny
- 11045612534
- Taper iso
- SK40
- Podróz w osi x
- 500mm
- Podróz w osi y
- 450mm
- Podróz w osi z
- 400mm
37 949 kg
CO₂e
Tyle emisji dwutlenku węgla możesz zaoszczędzić, decydując się na zakup tego przedmiotu używanego zamiast nowego.Dla porównania, lot Berlin - Lizbona odpowiada 169 kg CO₂e na pasażera.
Mogą Ci się spodobać
