SB 25/12 Various Drilling Machines
- Przedmiot:03U-EV5-1
- Hammelburg, DE
- Aktualna oferta
- Status
Aktywuj auto-licytację
Zalecane
Informacje o tym przedmiocie
1. Column drilling machine type SB 25/12 (built in 1994)
Robust drill with 12-stage belt drive and a drilling capacity of 25 mm.
Powered by a 1.1 kW three-phase motor (380 V, 50 Hz). Stable design with smooth running, precise spindle guidance and table adjustment. Ideal for metal and workshop work.
• Speed range: 120 – 2,580 rpm (12 steps)
• Drilling capacity: 25 mm
• Dimensions (L×W×H): approx. 600 × 400 × 1,700 mm
• Weight: approx. 120 kg
2. Fine boring machine Bernhard Steinel / Hahn & Kolb (Stuttgart, ca. 1970)
Precise benchtop fine drilling machine for small holes in metal and plastic. Ideal for precision mechanical applications. Belt-driven spindle with high speeds, compact and low-vibration design.
• Speed range: 2,000 – 11,200 rpm
• Drilling capacity: approx. 6–8 mm
• Dimensions (L×W×H): approx. 350 × 250 × 500 mm
• Weight: approx. 40 kg
Robust drill with 12-stage belt drive and a drilling capacity of 25 mm.
Powered by a 1.1 kW three-phase motor (380 V, 50 Hz). Stable design with smooth running, precise spindle guidance and table adjustment. Ideal for metal and workshop work.
• Speed range: 120 – 2,580 rpm (12 steps)
• Drilling capacity: 25 mm
• Dimensions (L×W×H): approx. 600 × 400 × 1,700 mm
• Weight: approx. 120 kg
2. Fine boring machine Bernhard Steinel / Hahn & Kolb (Stuttgart, ca. 1970)
Precise benchtop fine drilling machine for small holes in metal and plastic. Ideal for precision mechanical applications. Belt-driven spindle with high speeds, compact and low-vibration design.
• Speed range: 2,000 – 11,200 rpm
• Drilling capacity: approx. 6–8 mm
• Dimensions (L×W×H): approx. 350 × 250 × 500 mm
• Weight: approx. 40 kg
- Uwagi:
- Both machines are in good, used condition and are fully functional. The SB 25/12 column drill (built in 1994) runs smoothly, all switching and adjustment functions work perfectly. Mechanically solid, with only slight signs of wear on the paint and surface. The Bernhard Steinel / Hahn & Kolb fine boring machine (ca. 1970) is also functional, with age-related optical signs of use, but without technical defects. Both machines have been tested at idle, show no abnormalities in operation and are immediately ready for use. Sold as a lot (2 machines), without accessories.
- Numer przedmiotu:
- 03U-EV5-1
- Lokalizacja:
- Hammelburg, DE
- Sprzedawane przez:
- Sprzedawca firma
Specyfikacja przedmiotu
- Ilość
- 1
- Marża
- Nie
- Typ
- SB 25/12
- Rok budowy
- 1994
- Wydajnosc wiercenia
- 25mm
- Wyladowanie
- 180mm
- Glebokosc wiercenia
- 120mm
- Liczba predkosci
- 12
- Predkosc od n=
- 120rpm
- Predkosc do n=
- 2580rpm
