1 / 7
SIDEL Sbo 6 Stretch Blow Molder
- Aktualna oferta
- Status
€
Całkowita kwota oferty
Zobacz całkowite podsumowanie
Całkowita kwota oferty
Zobacz całkowite podsumowanie
€
Maksymalna kwota oferty
Zobacz całkowite podsumowanie
Maksymalna kwota oferty
Zobacz całkowite podsumowanie
Specyfikacja przedmiotu
- Ilość
- 1
- Marża
- Nie
- Marka
- Sidel
- Typ
- Sbo 6
- Rok budowy
- 1993
- Podrecznik obecny
- Tak
- Waga maszyny
- 12500kg
- Warunki dostawy
- Ex fundacja bez opakowania
Opis
Machine Type: PET Stretch Blow Molding Machine (Reheat-Stretch-Blow-Molding)
Number of cavities: 6
Capacity: up to 7,200 bottles/hour Product formats Bottle volume: 0.25 – 3.0 litres Max. bottle height: 380 mm Max. bottle diameter: 130 mm Max. preform length: 210 mm Neck diameter (inside): 34 mm Dimensions & Weight Blowing module: 2,000 × 2,200 × 2,200 mm, approx. 8,000 kg Oven: 3,000 × 1,100 × 2,100 mm, approx. 2,000 kg Control cabinet: 1,500 × 1,000 × 2,100 mm, approx. 1,000 kg Transformer (415V/380V): 1,000 × 500 × 2,000 mm, approx. 500 kg Preform containers & conveyors: 3,000 × 1,500 × 3,500 mm, approx. 600 kg (1–2 hours production stock) Preform feed: 2,000 × 2,500 mm, approx. 250 kg Feeding guides: length 2,000 mm Supply / Utilities Installed capacity: 142 kW Mains connection: 380/420 V ±10 %, 50 Hz ±1 % (other voltages possible) Coolant: Capacity: 16,000 kcal/h Temperature: 10–12 °C Flow rate: up to 6.0 m³/h Pressure: 5–6 bar Compressed air requirement: Control air (oily): 7 bar, 50–100 Nm³/h Blowing air (clean, oil-free): up to 35 bar, 155–770 Nm³/h (depending on cylinder type 0.25–3.0 l)
Number of cavities: 6
Capacity: up to 7,200 bottles/hour Product formats Bottle volume: 0.25 – 3.0 litres Max. bottle height: 380 mm Max. bottle diameter: 130 mm Max. preform length: 210 mm Neck diameter (inside): 34 mm Dimensions & Weight Blowing module: 2,000 × 2,200 × 2,200 mm, approx. 8,000 kg Oven: 3,000 × 1,100 × 2,100 mm, approx. 2,000 kg Control cabinet: 1,500 × 1,000 × 2,100 mm, approx. 1,000 kg Transformer (415V/380V): 1,000 × 500 × 2,000 mm, approx. 500 kg Preform containers & conveyors: 3,000 × 1,500 × 3,500 mm, approx. 600 kg (1–2 hours production stock) Preform feed: 2,000 × 2,500 mm, approx. 250 kg Feeding guides: length 2,000 mm Supply / Utilities Installed capacity: 142 kW Mains connection: 380/420 V ±10 %, 50 Hz ±1 % (other voltages possible) Coolant: Capacity: 16,000 kcal/h Temperature: 10–12 °C Flow rate: up to 6.0 m³/h Pressure: 5–6 bar Compressed air requirement: Control air (oily): 7 bar, 50–100 Nm³/h Blowing air (clean, oil-free): up to 35 bar, 155–770 Nm³/h (depending on cylinder type 0.25–3.0 l)
