Dražba Closure of a Precision Mechanic

FEHLMANN PICOMAX 80 CNC CNC vertical machining center

FEHLMANN PICOMAX 80 CNC CNC vertical machining center
Najboljša izbira
serijska št. 10
Dražba je končana.
Dražba je končana
Odkrijte podobne izdelke, ki so na voljo.
Ime
FEHLMANN PICOMAX 80 CNC CNC vertical machining center
Številka izdelka
925703
Proizvajalec
FEHLMANN
Model / Vrsta
PICOMAX 80 CNC
Leto izdelave
1996
Izdelek na voljo od
immediately
Kakovost izdelka
Lokacija
Nemčija, 72768 Degerschlacht
Cena demontiranja in nalaganja (binding)
950.00 €
Cena prevoza
ne vsebuje
Pogoji dostave
FCA Degerschlacht, naloženo na dostavno vozilo
Pogoji plačila
100% plačilo pred prevzemom
Približna teža
3,000 kg
približne mere postavitve (d x š x v)
2,500 x 2,000 x 2,200 mm
Machine number: 15194325
Operating voltage: 400 V
Frequency: 50 Hz
Rated current: 32 A
Control voltage: 24 V
Light voltage: 230 V
Attention: the machine has received a factory overhaul in 2005
Control: HEIDENHAIN TNC 415
Travel distances:
X: 700 mm
Y: 315 mm
Z: 178 mm
Traverse path machine head W axis: 495 mm
Feed rates:
X- and Y-axis: 1 - 9000 mm/min
Z-axis: 1 - 4000 mm/min
W-axis: 1 - 4500 mm/min
Rapid traverse:
X- and Y-axis: 9 m/min
Z-axis: 4 m/min
Position measuring system:
Resolution:
Direct measuring system via linear scale in X- Y and W axis
Indirect measuring system via rotary encoder Z axis
Resolution in X, Y, Z and W axis: 0.001 mm
Accuracy:
Positioning tolerance in X and Y axis: 0.015 mm
Position tolerance in Z and W axis: 0.0025 mm
Position spread width: 0.002 mm
Table dimensions: 1230 x 410 mm
Number of T-slots: 7
T-slot width: 12 mm H8
Spacing: 50 mm
Permissible table load: 250 kg
Table height from floor: 1010 mm
Distance table to spindle nose: 0 - 165-660 mm
Horizontal projection: 370 mm
Tool holder: SK 30
Cutting performance:
Drilling capacity: 30 mm diameter
Thread cutting: M24
The machine is equipped with a 32-fold
tool changer
Max. Tool diameter:
All slots occupied: 63 mm
Free slots required: 100 mm
Max. Tool length: 270 mm
Max. Tool weight: 3 kg
Tool change time: approx. 5 s
Average chip-to-chip time: approx. 10 s
The machine is equipped with a 3D measuring probe as well as a coolant tank and an integrated workshop drawer cabinet consisting of approx. 15 SK 30 tool holders Prikaz prevoda
Samodejni prevod
Ime dražbe
Closure of a Precision Mechanic
serijska št.
10
Dokumenti
Posebni pogoji dražbe
Pregled
Točen naslov vam sporočimo glede na zanimanje.
72768 Degerschlacht, Germany

- address on request only -

Please set up an inspection appointment, stating the lot number via e-mail: rmi@surplex.com
Prevzem
Ponedeljek, 15.07.2024 do
Torek, 16.07.2024, od 08:00 Ura do 16:00 Ura

Ponedeljek, 22.07.2024 do
Petek, 26.07.2024, od 08:00 Ura do 16:00 Ura


Naše storitve
  • Osebne storitve v 16 jezikih
  • Svetovanje na lokaciji in s strani strokovnjakov
  • Po potrebi organizacija prevoza
  • Pomoč pri urejanju papirjev in carine