ENGEL ES 2550/600 HL Injection molding machine

Serial number: 42169,
Own weight: 7,000 kg
Injection unit: Screw diameter: 80 mm,
metering stroke: 310 mm,
max. stroke volume: 1,558 cm³,
screw speed: 183 rpm,
standard screw length: 20 L/D,
plasticizing capacity: 90 g/s,
injection flow: 478 cm³/s,
specific injection pressure: 1,400 bar,
specific injection pressure increased: 1. 640 bar,
nozzle stroke: 650 mm,
nozzle pressing force: 110 kN,
heating power: 34 kW,
number of heating zones including nozzle: 5,
pump drive power: 55 kW,
oil filling main tank: 1,000 l,
oil filling suction tank: 850 l,
weight of injection unit: 7 t
Clamping unit: Clamping force 6,000 kN,
opening force: 300 kN,
moving cylinder force: 150 kN,
opening stroke: 1,200 mm,
mold installation height min. 800 mm,
platen distance max. 2,000 mm,
platen size HOR.X.WERT. 1,580 x 1,300 mm,
ejector stroke: 250 mm,
ejector force: 110 kN,
weight of clamping unit: 41 t,
total weight: 48 t

Equipment: including stairway platform

Note on condition: Attention, this is only the injection molding machine, any peripherals that can be seen in the photo, such as: Robot arm, feeder, etc., are not included in the lot;

Attention mass cylinder is missing

INFO: Production must be stopped to remove the equipment, so it would be preferable to the plant during the interruption in summer (end of July, beginning of August).

Location: A-2435 Ebergassing Afișează traducerea